SAM4s SPS-500 series programming manual.pdf

Recall Check Key Program NotesDRIVE THRU FEATURE ENABLED?Set to Yes if the tracking file is used for drive thru windows in fast food operations. In this case, therecall key will automatically recall the lowest tracking number from the appropriate tracking file. Note:see Store Check key programming. You must also set the appropriate Store Check key with the drive thruoption enabled. Note: you cannot use alpha check number with a drive thru system.SCAN CHECK#Allows use of scanner to enter check number. Note: If check numbers are assigned by register, theoperator will be prompted to choose SCAN CHECK or OPEN A NEW CHECK when the RECALLCHECK key is touched. Note: P/SYSTEM OPTION/TRACKING FILE OPTIONS/Option #8 must beset to a minimum of 4-digits.Store Check Key Program NoteENABLE DRIVE THROUGH OPTIONSet to Yes if the tracking file is used for fast food operations. In this case, the store key will automaticallyassign the next tracking number from the appropriate tracking file and store the transaction. Note: seethe programming for the Recall Check key. You must also set the appropriate Recall Check key with thedrive thru option enabled.Waste Key Program NoteAFFECT ON PROJECTIONSIf Yes, the projection report will consider actual sale plus waste. If No, the projection report will onlyconsider sales.Alpha Text Key Program NotesIf “USE PREDEFINED ALPHA DESCRIPTOR” option is set to YES, ten predefined options, as well asa “MANUAL REMOTE ENTRY” button are displayed from ALPHA TEXT function key. The“MANUAL REMOTE ENTRY” button allows custom on-the-fly entries.If “DO NOT ALLOW MANUAL” is selected, the user cannot enter on-the-fly instructions.If “ALLOW ON SCREEN ALPHA TEXT MESSAGES” is selected, users can define the 10 pre-definedmessages on-the-fly. In this manner, if a commonly entered PLU or instruction is not available, it can becreated and reused as transactions are entered.100 P Mode Programming SPS-500 Program Manual v1.13