Cellcorder Battery Analysis System User's Guide - Alber

The IMPORTANT Configuration File EditorType Tab – Configuration EditorUse the Typetab to set theAmp HourRating andIntercellType.Figure 67. Configuration Editor Type Tab4.1.2 Amp Hour RatingSelect the battery size, smaller or larger than 1000 Ah. This sets thelength of time the Cellcorder applies a load during a load test.NOTE:Select how many Intercell Connections IC per cell will beread (one to four) by choosing Single, Dual, Triple orQuad, or select Combined or Computed.4.1.3 Single TestingIf the user is testing batteries with (2), two terminals and the batteries areconnected in series.4200-002 35 Revision 4.01