Pneumatic Cylinders - Norman Equipment Co.

More documents

Recommendations

Info

Air System ComponentsOrderingFog-Type LubricatorsHelp ensure that pneumatic devices receive the required lubrication to maintainoperating performance, reduce wear and prolong service life. They aredesigned to provide the correct amount of oil needed for most generalapplications in a pneumatic system, delivering a constant ratio of oil to CFM.Precise oil feed adjustment allows the proper oil delivery rate.Lubricators should be installed close to the downstream application to ensureeffective distribution of oil to the pneumatic components.Port Flow* Bowl Max. InletSize Model cfm Bowl Size Pressure1/8” & 1/4” Port - ARO Module/Air 1000 Series1/8” L26111-100 41 Polycarbonate/Guard1.0 oz. 200 PSIG1/4” L26121-100 60 Polycarbonate/Guard1.0 oz. 200 PSIG1/4” & 3/8” & 1/2” Port - ARO Module/Air Series1/4” L26221-110 75 Metal w/sight glass 6.0 oz. 175 PSIG3/8” L26231-110 100 Metal w/sight glass 6.0 oz. 175 PSIG1/2” L26241-110 110 Metal w/sight glass 6.0 oz. 175 PSIG3/4” & 1” Port - ARO Super-Duty Series3/4” L26451-110 190 Metal w/sight glass 32 oz. 250 PSIG1” L26461-110 200 Metal w/sight glass 32 oz. 250 PSIG* Air Flow is at 90 PSI Inlet and 5 PSI pressure drop.L26121-100LubricatorPart Number Description L26221-110ARO Module/Air 1000 Series104181 Service Kit104260 Polycarbonate Bowl104261 Composite Bowl104262 Mounting BracketARO Module/Air 2000 Series104181 Service Kit104205 Metal Bowl w/sightGlassARO Super-Duty Series104118 Service Kit104163 Sight Glass KitAccessoriesAir Line Lubricator OilARO Lubricating Oil is recommended for use with pneumatic power tools,motors, valves, cylinders and hoists. It is specially formulated for use inair line lubricators. Proper and regular lubrication helps ensure longer,trouble-free operation by reducing wear, saving power and cuttingequipment maintenance costs.L26451-110ARO Lubricating Oil is available in 1-quart containers and may be orderedby specifying part number 29665. (Available in cases of 12).Viscosity: 100-200 S.S.U. @ 100°F (38° C)min. aniline point of 200°F (93°C)Class:II LubricantApprox. SEA No: Light SAE 10, non-detergent.2966580
WarningsGeneral InformationWarningsHarmful Compressor Oils & Other MaterialsSome oils used in air compressors contain chemicals harmful to Buna-N seals, if not adequately filtered atthe compressor. The most common of these oils, in addition to other harmful material, are listed below.COMPRESSOR OILS COMPRESSOR OILS OTHER MATERIALSCellulube No. 150 & 220 Phrano Garlock No. 98403 (Polyurethane)Haskel No. 568-023 Pydraul AC Parco No. 3106 (Neoprene)Hougton & Co. Oil No. 1120, Sears Regular Motor Oil Some Loctite CompoundsNo. 1130, No. 1055 Sinclair Oil “Lily White” Stillman No. SR269-75(Polyurethane)Houtosafe 1000 Skydrol Stillman No. SR513-70 (Neoprene)Kano Kroil Tenneco Anderol No. 495Keyston Penetrating Oil No. 2& No. 500 OilsMarvel Mystery OilCAUTION: Compounded oilscontaining graphite and fillersare not recommended for usewith cylinders.Air & Lubrication RequirementAIR PRESSURE: Limited to 200 psig(14 bar) FILTRATION: 40 Micron.Proper moisture removal and filtrationof contaminates will promote goodservice life and operation. Install an airregulator to control the operatingpressure, insure smooth operation andconserve energy.LUBRICATION: All valve componentshave been lubricated at the factory andcan be operated without additional airline lubrication. Minimal lubricationmay extend the life of the valve. 50Series, E-Series and K-Series Valvesuse o-ring seals. For maximumperformance and life expectancy,standard air line lubrication should beused. If air line cylinders or other airline devices, used in conjunction withARO valve, require lubrication, be surethe lubricating oils used are compatiblewith the valve seals and are of sufficientviscosity to assure adequate lubrication.ARO recommends an oil lubricant witha viscosity of 100-200 SUS at 100° Fand an airline point above 200° F.NOTICE: The use of compound oilscontaining graphite filters, extremelylow viscosities an other non-fluidlubricants is not recommended.RECOMMENDED: ARO 29665 air linelubricator oil is available in one quartcontainers.WarningThe following are hazards or unsafepractices which could result in severepersonal injury, death or substantialproperty damage. Heed the following.Use safeguards. Insure that provisionsare made to prevent the valve frombeing accidentally operated (actuated.)Hazardous Air Pressure. Shut off,disconnect and relieve any trapped airpressure from system beforeperforming service or maintenance.Hazardous Voltage. Do not attemptany service without disconnecting allelectrical supply sources.NOTICE: Genesis Series Valves mustbe grounded.Do not use the valve as a safety deviceor to operate or control the operation offull revolution clutch systems or brakesystems on power presses or similarequipment. These valves are notintended for such applications. Do notsubject the valve to any condition thatexceeds the limits set forth in thespecifications for a particular valvemodel. Keep all hoses, electrical wiring,fittings and connections in goodworking condition. Damaged airpressure hoses, electrical wiring, orconnections, could cause accidentalvalve operation (actuation). Only allowqualified technicians to install ormaintain the valve system. It isnecessary to have a throughunderstanding of the operation andapplication of all valves being used in aparticular system and how they interactwith the other components of thesystem.General InformationTo obtain information or to receivetechnical literature for specific cylinders:contact ARO Customer Service at (800)495-0276 or contact your nearest AROdistributor. Selected parts are providedin kit form. The ARO Parts List/ServiceInstructions contain Repair Kitinformation and complete ServiceParts information and are availableupon request. Order Manuals as shown.The following Operator’s Manuals areavailable.Operator’s Manual Part NumberARO CYLINDERS 119999-27PROVENAIR 119999-30ECONOMAIR 119999-16MICROAIR 119999-41PREMAIR COMPACTS 119999-78PROVENAIR TANKS 119999-03281
Page 4 and 5:
Pneumatic CylindersDescriptionsSeri
Page 7 and 8:
Pneumatic CylindersDeveloping Speci
Page 10:
Pneumatic CylindersOptionsAdditiona
Page 13 and 14:
Pneumatic CylindersMicro-AirDimensi
Page 15 and 16:
Pneumatic CylindersSilverair Orderi
Page 17 and 18:
Pneumatic CylindersSilverair A BDi
Page 19 and 20:
Pneumatic CylindersSilverair Dimens
Page 21 and 22:
Pneumatic CylindersSilverair Dimens
Page 23 and 24:
Pneumatic CylindersSilverair MM EE
Page 25 and 26:
Pneumatic CylindersSilverair Featur
Page 27 and 28:
Pneumatic CylindersPremair Composi
Page 29 and 30:
Pneumatic CylindersPremair Composi
Page 31 and 32: Pneumatic CylindersPremair Composi
Page 37 and 38: Pneumatic CylindersEconomair ®Orde
Page 39 and 40: Pneumatic CylindersEconomair ® - D
Page 41 and 42: Pneumatic CylindersEconomair ®Swit
Page 43 and 44: Pneumatic CylindersProvenair ®Prov
Page 45 and 46: Pneumatic CylindersProvenair ®Orde
Page 47 and 48: Pneumatic CylindersProvenair ®Atta
Page 49 and 50: Pneumatic CylindersProvenair ® - D
Page 55 and 56: Pneumatic CylindersProvenair ®Orde
Page 59 and 60: Pneumatic CylindersRepair KitsNot U
Page 61 and 62: Compact CylindersPremair SeriesPrem
Page 63 and 64: Compact CylindersPremair SeriesSele
Page 65 and 66: Compact CylindersMagnetic Position
Page 67 and 68: Compact CylindersPremair SeriesMode
Page 69 and 70: Compact CylindersPremair SeriesDevi
Page 71 and 72: Compact CylindersPremair SeriesM D
Page 73 and 74: Compact CylindersPremair SeriesRod
Page 75 and 76: Compact CylindersPremair SeriesFlan
Page 77 and 78: Pneumatic ValvesFlow ControlsFeatur
Page 79 and 80: Air System ComponentsOrderingStanda
Page 81: Air System ComponentsAir Line Relie
Page 86: Ingersoll Rand Industrial Technolog
show all

Pneumatic Cylinders - Norman Equipment Co.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?