Pneumatic Cylinders - Norman Equipment Co.

Pneumatic CylindersDescriptionsSeries 01 Micro-Air Cylinders(1/2" thru 1-1/8" bore)Micro-Air Cylinders, small bore, repairable, double-actingcylinders, are designed for light duty applications. Availablein 1/2, 3/4, and 1-1/8 inch bore sizes. Operate on airpressure to 200 PSI, generating thrusts from 4.9 to 199pounds. They are available in stroke lengths up to 6 inchesand in several mounting styles. For more information, seepages 9 through 11.Series S Silverair Cylinders(1/2" thru 2-1/2" bore)Silverair Cylinders, small and medium bore, disposable,single- and double-acting cylinders are designed for lightduty applications. Available in bore sizes from 1/2 inch to 2-1/2 inches. Operate on air pressures to 200 PSI, generatingthrusts up to 982 pounds. For more information, see pages12 through 24.Premair Composite Cylinders(7/16" thru 2" bore)Featuring a patented composite body construction, the newPremair cylinder is ideal in assembly environments wherecorrosive (including wet or wash down) conditions exist.Premair’s composite construction is also dent-resistant,lighter weight, quieter and provides superior service lifewhen compared to metal cylinders. Available in 7 bore sizesand 3 types (double-acting, spring extend, spring retract);Premair offers a broad spectrum of trouble-free linearmotion. For more information, see pages 25 through 33.Series 23, 24 & 28 Economair ® Cylinders(1-1/8" thru 4" bore)Economair Cylinders, round line repairable cylinders, aredesigned for medium to heavy-duty use in a wide range ofapplications. Available in 1-1/8 to 4-inch bore sizes.Operate on air pressure to 200 PSI, generating thrusts from25 to 2,513 pounds. Available as double-acting, withoptional cushions, magnetic pistons or double rod ends. O-ring seals are standard. U-cup or low friction seals areoptional. A variety of mounts are available to meet a widerange of application requirements.For more information, see pages 34 through 39.2