Balancing Natural Edge Bowls Questions and Answere The Pen ...

Figure 3. The new tool mounted to a faceplate.I can now turn the spigot and rough out the outsideof the bowl. I take the faceplate off the lathe andthe blank; and mount the blank on a 4 jaw chuck. Inless than 5 minutes I can have the blank balanced anda spigot turned. I usually run 4 to 6 bowls through theprocess at one pass. Working with multiples, makes thecentering process even faster.Figure 4. The blank with the faceplate and newtool setting on the surface. The square can be usedto help center the faceplate to the blank and alsomove the faceplate around to level the faceplate tothe flat surface of the blank. Shims can be addedunder the faceplate to level it before applyingscrews to secure the faceplate to the blank.Intelligent sensing of turningconditions adjusts latheperformance to meet turningdemands, senses chisel digins and adjusts instantlyNOVA DVR XPNEW! 5 Favourite Speedfunction for even easierspeed selection.Download thepamphlet,view videos atwww.teknatool.comThe world’s most intelligent lathe combined with the power, capacity & capability of astationary lathe - the DVR XP is revolutionaryNEW! Higher torque motor.Delivering even morepower over the old model.Extendable Bedsadds 20” capacityper section - takeyour lathe as longas you wantDirect Drive (no belts, nopulleys) means ultrasmooth cutting conditionsAvailable in the USA fromWoodcraft Supply Corpwww.woodcraft.comCraft Supplies USAwww.woodturnerscatalog.comWoodworkers Supplywww.woodworker.comPackard Woodworkswww.packardwoodworks.comSwivel Headstocklocks at any positionmakes your turningmore comfortable,saves spaceCapacity, power & capability of amuch larger lathe in a compactfootprint - 1.75HP motor, 16” inboard,29” outboard with easy to useoutrigger accessoryNEW! Updated designsolid cast iron componentsmeans rock solidperformanceMore Woodturning June 2010 Page 5