Balancing Natural Edge Bowls Questions and Answere The Pen ...

Geiger’s Re-Centering SolutionThe components supplied with the systemGeiger’s Re-Centering Solution is a system thatenables wood turners to drill a shallow hole that is absolutelycentered on the waste stock of a work piece.The hole will subsequently be used to re-center theblank when jamb chucking or vacuum chucking. A recenteringpin is supplied to replace the center point of aOne Way or Jet live center. This pin is used to establishand maintain the position of the blank when jamb orvacuum chucking. It’s a quick, easy and very accurateway to re-center your work. You’ll use it every timeyou turn!Pick one of the following three sizes:Left to right: M33 3.5, 1-1/4” X 8 and 1” X 8Total system price: $64.95 (FL residents add $4.38tax) + $8.00 shippingThey accept Visa, MasterCard, Discover andchecks. All orders may be placed via telephone, at352-472-5035. If you have any questions, please callDon Geiger at: 352-472-5035 or E-mail: dongeiger@cox.net.Web Site: http://www.geigerssolutions.com/Note: Don Geiger posted on the WoodCentral MessageBoard concerning his Re-Centering Solution. I don’tuse faceplates very often, but for those who do this recenteringsolution may well be worth adding to yourtool inventory. I’ve often thought something like thiswould be helpful when remounting a bowl blank thatwas originally mounted to the lathe on a faceplate.Where Turners Turn FirstINFORMATION AND RESOURCES FORWOODTURNERS WORLDWIDEFind articles, projects, new products, vendors, club listings,turner websites, courses and schools, discussion forum,books and videos and much more!WWW.WOODTURNINGONLINE.COMPage 24 More Woodturning June 2010