Catalyst 3560-E Switch Getting Started Guide - Cisco
Catalyst 3560-E Switch Getting Started Guide - Cisco Catalyst 3560-E Switch Getting Started Guide - Cisco
Before Attaching the BracketsTo install the switch in a rack, you must first remove the screws from the switch chassis so that themounting brackets can be attached. For attachment at the front-mounting position remove twoPhillips truss-head screws from the switch side panels. For some switch models, remove only one screwfrom the side panels. For attachment at the mid-mounting position, remove one screw. For attachmentat the rear-mounting position, remove one or two screws depending on the switch model.41 42 43 44 45 46 47 4820005347X49X2-150X2-248XCatalyst 3560-E SERIES PoE-48515214
10-5 A50-60 HZAC OK PS OKAttaching the BracketsUse four number-8 Phillips flat-head screws to attach the long side of each bracket to the switch in oneof three mounting positions.1141 42 43 44 45 46 47 4847X49X2-150X2-2Catalyst 3560-E SERIES PoE-4848X522513341 42 43 44 45 46 47 4847X49X2-150X2-2Catalyst 3560-E SERIES PoE-4848X5225144100-240 V20005421 Front-mounting position 3 Mid-mounting position2 Number-8 Phillips flat-head screws 4 Rear-mounting position15
- Page 1 and 2: GETTING STARTED GUIDECatalyst 3560-
- Page 3 and 4: SYSTRPSMASTRSTATDUPLXSP EDSTACKPoEM
- Page 7 and 8: Step 15Step 16(Optional) You can en
- Page 9 and 10: Refreshing the PC IP AddressAfter y
- Page 11 and 12: Other Management OptionsYou can use
- Page 13: WarningTo prevent bodily injury whe
- Page 17 and 18: 6 Connecting to the Switch PortsThi
- Page 19 and 20: Install SFP Modules and Connect to
- Page 21 and 22: Resetting the SwitchThis section de
- Page 23 and 24: 9 Cisco Warranty TermsCatalyst 3560
Before Attaching the BracketsTo install the switch in a rack, you must first remove the screws from the switch chassis so that themounting brackets can be attached. For attachment at the front-mounting position remove twoPhillips truss-head screws from the switch side panels. For some switch models, remove only one screwfrom the side panels. For attachment at the mid-mounting position, remove one screw. For attachmentat the rear-mounting position, remove one or two screws depending on the switch model.41 42 43 44 45 46 47 4820005347X49X2-150X2-248X<strong>Catalyst</strong> <strong>3560</strong>-E SERIES PoE-48515214