USB Based 8-Channel Data Acquisition Module Features Applications

More documents

Recommendations

Info

Absolute Maximum RatingsStresses above those listed here may cause permanent damage to the unit:• Operating Temperature: 0-70°C• Voltage on I/Os with Respect to Ground: -0.3V to +5.3V• Sink/Source Current on Any I/O: 25mAWarnings• Unplug unit from the PC before connecting any interfaces to board terminal.• Isolate the bottom of the board from all conductive surfaces.• Observe static precautions to prevent damage to the module.USB DriverUSB drivers for the following operating systems are available for download from our website:Windows XP, Windows7-32 Bit and 64 BitDownload USB Driver from below link, It has readme text file to help you with instructions to install.http://www.sunrom.com/files/ST3683-driver-setup.zipFirst connect Board to PC then start USB Driver Setup.You can open Start > Device and Printer menu to see the installed Port to which software canconnect. A com port should also appears in Device Manager under Ports.Board is detectedby PC as VirtualCom Port6Sunrom Technologies Your Source for Embedded Systems Visit us at www.sunrom.com
Mechanical DimensionsDimensions in mm7Sunrom Technologies Your Source for Embedded Systems Visit us at www.sunrom.com
Page 3 and 4: Channel 3 CommandsASCII Character H
Page 5: Measure Temperature using DS18B20 T

USB Based 8-Channel Data Acquisition Module Features Applications

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?