Wastewater Drainage Drains - Coral Instal

DrainsFloor Drains - System 125Floor Drains - System 100Basement drainsParking deck / Balcony / Roof / Yard drainsWastewater Drainage

Professional drainageDrainage: This is how it worksDrains are dewatering means which are usedto collect, receive and convey wastewater.These include bathroom, floor, roof, balconyand basement drains as well as yard and raindrains.Since 1st July 2001, EN 12056 is used as thebasic standard for gravity drainage systemswithin buildings. This standard establishes thegeneral, basic requirements and calculationmethods throughout Europe. However, sincemany countries have their own drainage system,therefore imposing specific requirementsfor construction and safety, the respectivenational regulations remain in force. InGermany, this is DIN 1986-100. It controls thespecific design requirements and standardinstallations. In accordance with this DINstandard, section 8.2.1, sanitary facilities inbuildings which are used by an ever-changinggroup of people or which are open to the public,such as hotels and schools, have to be fittedwith a floor drain with an odor trap. Bathroomsin homes should be fitted with a bathroomdrain. In addition to the floor-draining function,the bathroom drain protects against floodingand penetration of the water into the structureowing to overflowing bathtubs or washingmachine defects. Balconies must also be fittedwith a floor drain.Types of drainsWhen choosing the suitable place for the drain,a choice is basically made between floor drainsfor use within buildings or outside of buildings.Load class, aestheticappearance andtypes of coversAll of the upper sections with the load class Kcan be used in bathrooms of homes, nursinghomes, hotels, schools, swimming baths, inrows of sinks and shower systems, and onbalconies.KESSEL offers many possibilities for a clientwho places importance on an aestheticallypleasing appearance of the visible cover.Appropriate choiceof materialDrains are available in many different materials.Usage depends on requirements and the type ofwastewater to be discharged. Drains of syntheticmaterial are generally characterised bya high impact strength, light weight and simpleinstallation.AS 2Catalog 2009

Floor/Bathroom/Roof Drains / Shower channelsfor interior installationSystem 125Parking deck drains andBalcony/Roof/Rain/Yard drainsBasement drainswith/without backwater protectionFloor/Bathroom/Roof Drains/Shower Channel System 125Bathroom drains/Shower channelsSystem 100Catalog 2009AS 3

Ecoguss ® - The new high-tech material ...The efficient alternativeto cast iron drainsKESSEL uses, with the new Ecoguss ® drains,a completely new, but fully tested, compositematerial which combines the advantages of castiron and synthetic material. Resulting in simplemanufacturing, outstanding efficiency anddesign-orientated covers.With Ecoguss ® KESSEL directly providesplanners, manufacturers and authoritieswith a new and conclusively efficientproduct line of floor and roof drainsfor public and commercial buildings.Ecoguss ® - the drains of choice forhospitals, sanatoria, nursing homes,swimming facilities and many otherareas of application!Savings:22%+ Easier assemblyby Quick-FitCast ironCorrosionEcoguss ®Corrosion-freenot that . . .Leakage and complicated cleaningThe cover and odor trap can frequently no longerbe removed or replaced after cleaning. This resultsin leaks, i.e., unpleasant odors. In the worst casescenario: Structural damage due to leaking drains.Lack of hygieneBacteria and germs build up on the corrodingsurface and multiply.. . . but this !Water-tight and problem-free cleaningThe cover and odor trap can always be easily removed andreplaced. Long-term, durable water-tightness is ensured.Exemplary hygieneSelf-cleaning effect owing to the permanentlycorrosion-free and smooth surface.AS 4 Catalog 2009

Ecoguss ® - Product characteristicsMetallic compound material• The properties of metal, yet corrosion-free andnon-conductive (no electrical grounding required!)• Honeycomb structure for perfect integration into concrete.• Ecoguss replaces primed and epoxied drainsSimple installation• Can be installed with hot bitumen according to DIN 18195.• Connection to moisture barrier.• Additional sound insulation and smoke-tightclosure between the core drilling and the outlet.• Quick-Fit - the all-round seal for core drillings.Fire and smoke protectionResistant to high temperatures up to 400°C (short-term).Optionally with the Fire-Kit insert for fire-protection for drainbodies with vertical outlet.With SML-pipe connectionConnection to SML-pipe in accordance with DIN 19522in Ø 58, 78, 110and NEW: Ø 83! No more transition sections!DN 50Ø* 5875788083110110Minimised core drillingsØ 160 mm about 2/3 costs savingHigh fracture resistance* Ø = Outer DiameterDesign covers and shower channelsAward-winning oval design coverWith Lock & Lift System for simple and cost-saving cleaning.Chemical resistanceExtremely resistant to acids and alkalis for chemical-containingwastewater.Sound insulation• Sound-absorbing material• Optimum hydraulics• For increased sound insulation according to DIN 4109 < 30 dB (A)Catalog 2009AS 5

Floor/Roof drains Ecoguss ®For interior installation according to EN 1253 System 125Floor/Roof drainsEcoguss ®Bathroom drains/Shower channelsSystem 100Basement drainswith/without backwater protectionParking deck drains andBalcony/Roof/Rain/Yard drainsIllustration and dimensioned drawing Article description Ø* Art. #Art. # 48 811.55Ø*HArt. # 48 811.64Ø*HArt. # 48 811.41Ø*H* Ø = Outer Diameter58100with dual gasketVariable cover/Upper sectionInstallation area 180 x 180 mm7811083110with pressure sealing flange58100Variableupper section7811083110110110Installation area 180 x 180 mmwith pressure sealing flange58100Variableupper section78110min. 10max. 21min. 56max. 8029min. 25max. 70min. 25max. 6783110 312273273132135110110 273138135Installation area 180 x 180 mm110110107HH 107107HKESSEL Floor/Roof drainEcoguss ® with pressure sealingflange in stainless steel andVariofix shallow bed uppersection in ABSVertical outlet, 1.8 l/sec flow rateWith removable odor trap,Sealing water height 50 mm.With lip seal.With pressure sealing flange in stainlesssteel and Variofix shallow bedupper section in ABS1 with recessed polymer drain coverfor on-site tiling 110 x 110 mmand rim in stainless steelClass K3 (able to withstand loadsup to max. 300 kg).2 with slotted design cover120 x 120 mmand rim in stainless steelfor tile thicknesses of 8-21 mmClass L15 (able to withstand loadsup to max.1.5 to).KESSEL Floor/Roof drainEcoguss ® with pressure sealingflange in stainless steelVertical outlet, 1.8 l/sec flow rateWith removable odor trap,Sealing water height 50 mm.With lip seal.With pressure sealing flangein stainless steelWith upper section in ABSwith oval design cover120 x 120 mmand rim in stainless steel,Class L15 (able to withstand loadsup to max.1.5 to).KESSEL Floor/Roof drainEcoguss ® with pressure sealingflange in stainless steelVertical outlet, 1.8 l/sec flow rateWith removable odor trap,Sealing water height 50 mm.With lip seal.With pressure sealing flangein stainless steelWith upper section in ABS1 with slotted cover 138 x 138 mmin stainless steel,Class K3 (able to withstand loadsup to max. 300 kg).2 with slotted cover 138 x 138 mmand rim in stainless steel,Class L15 (able to withstand loadsup to max. 1.5 to).1Ø 58Ø 78Ø 83Ø 1102Ø 58Ø 78Ø 83Ø 110EN 1253Ø 58Ø 78Ø 83Ø 110EN 12531Ø 58Ø 78Ø 83Ø 1102Ø 58Ø 78Ø 83Ø 110EN 125348 858.5548 878.5548 883.5548 811.5548 858.5348 878.5348 883.5348 811.53LGAType-testedand monitoredguaranteed withtested quality48 858.6448 878.6448 883.6448 811.64LGAType-testedand monitoredguaranteed withtested quality48 858.1148 878.1148 883.1148 811.1148 858.4148 878.4148 883.4148 811.41LGAType-testedand monitoredguaranteed withtested qualityAS 6 Catalog 2009

Floor/Roof drains Ecoguss ®For interior installation according to EN 1253 System 125Illustration and dimensioned drawing Article description Ø*Art. # 48 778.63with pressure sealing flangeVariableupper sectionInstallation area 220 x 180 mmØ* 58 78 83 110B 245 134 134 148H 120 109 108 92Art. # 48 778.41with pressure sealing flangeVariableupper sectionInstallation area 220 x 180 mmØ* 58 78 83 110B 245 134 134 148H 120 109 108 92Art. # 48 611.65Ø*H* Ø = Outer Diameterwith glue flangeVariableupper section5810078110min. 25max. 70min. 25max. 67min. 30max. 7010583110273132273138348130135Installation area 180 x 180 mmBB110110HH147H147KESSEL Floor/Roof drainEcoguss ®Ø ..., lateral outlet 2.5°,1.8 l/sec flow ratefor connection to SML-pipeaccording to DIN 19522.With removable odor trap,Sealing water height 50 mm.With lip seal.With pressure sealing flangein stainless steelWith upper section in ABSwith slotted design cover120 x 120 mmand rim in stainless steel,with KESSEL Lock & Lift System,Class L15 (able to withstand loadsup to max. 1.5 to).KESSEL Floor/Roof drainEcoguss ®Ø ..., lateral outlet 2.5°,1.8 l/sec flow ratefor connection to SML-pipeaccording to DIN 19522.With removable odor trap,Sealing water height 50 mm.With lip seal.With pressure sealing flangein stainless steelWith upper section in ABS1 with slotted cover 138 x 138 mmin stainless steel, screwedClass K3 (able to withstand loadsup to max. 300 kg).2 with slotted cover 138 x 138 mmand rim in stainless steel, screwedClass L15 (able to withstand loadsup to max. 1.5 to).KESSEL Floor/Roof drainEcoguss ®Ø ..., vertical outlet,1.8 l/sec flow ratefor connection to SML-pipeaccording to DIN 19522.With removable odor trap,Sealing water height 50 mm.With lip seal.With glue flangeWith upper section in ABSwith recessed polymer drain coverfor on-site tiling 110 x 110 mmand rim in stainless steel,with locking system,Class K3 (able to withstand loadsup to max. 300 kg).Ø 58Ø 78Ø 83Ø 110EN 12531Ø 58Ø 78Ø 83Ø 1102Ø 58Ø 78Ø 83Ø 110EN 1253Ø 58Ø 78Ø 83Ø 110EN 1253Art. #48 758.6348 778.6348 783.6348 711.63LGAType-testedand monitoredguaranteed withtested quality48 758.1148 778.1148 783.1148 711.1148 758.4148 778.4148 783.4148 711.41LGAType-testedand monitoredguaranteed withtested quality48 658.6548 678.6548 683.6548 611.65LGAType-testedand monitoredguaranteed withtested qualityFloor/Roof drainsEcoguss ®Bathroom drains/Shower channelsSystem 100Basement drainswith/without backwater protectionParking deck drains andBalcony/Roof/Rain/Yard drainsCatalog 2009AS 7

Floor/Roof drains Ecoguss ®For interior installation according to EN 1253 System 125Floor/Roof drainsEcoguss ®Bathroom drains/Shower channelsSystem 100Basement drainswith/without backwater protectionIllustration and dimensioned drawing Article description Ø* Art. #Art. # 48 678.41Ø*HArt. # 48 578.1158100with glue flangeVariableupper sectionInstallation area 180 x 180 mm78110with glue flangeVariableupper sectionmin. 30max. 70min. 23max. 7010510583110348138110110Installation area 220 x 180 mmØ* 58 78 83 110B 245 134 134 148H 120 107 106 90135348150BHH145KESSEL Floor/Roof drainEcoguss ®Ø ..., vertical outlet,1.8 l/sec flow ratefor connection to SML-pipeaccording to DIN 19522.With removable odor trap,Sealing water height 50 mm.With lip seal.With glue flangeWith upper section in ABS1 with slotted cover 138 x 138 mmin stainless steel, screwedClass K3 (able to withstand loadsup to max. 300 kg).2 with slotted cover 138 x 138 mmand rim in stainless steel,screwedClass L15 (able to withstand loadsup to max. 1.5 to).KESSEL Floor/Roof drainEcoguss ®Ø ..., lateral outlet 2.5°,1.8 l/sec flow ratefor connection to SML-pipeaccording to DIN 19522.With removable odor trap,Sealing water height 50 mm.With lip seal.With glue flangeWith upper section in ABS1 with slotted cover 138 x 138 mmand rim in stainless steel,screwedClass L15 (able to withstand loadsup to max. 1.5 to).2 with slotted cover 138 x 138 mmin stainless steel, screwedClass K3 (able to withstand loadsup to max. 300 kg).1Ø 58Ø 78Ø 83Ø 1102Ø 58Ø 78Ø 83Ø 110EN 12531Ø 58Ø 78Ø 83Ø 1102Ø 58Ø 78Ø 83Ø 110EN 125348 658.1148 678.1148 683.1148 611.1148 658.4148 678.4148 683.4148 611.41LGAType-testedand monitoredguaranteed withtested quality48 558.4148 578.4148 583.4148 511.4148 558.1148 578.1148 583.1148 511.11LGAType-testedand monitoredguaranteed withtested qualityParking deck drains andBalcony/Roof/Rain/Yard drainsArt. # 48 411.51Ø*H* Ø = Outer Diameterwith shallow bed gasket58100Variableupper sectionDN135Installation area 180 x 180 mm78110min. 10max. 18min. 40max. 968311031213811011091H29KESSEL Floor/Roof drainEcoguss ®Ø ..., vertical outlet,1.8 l/sec flow ratefor connection to SML-pipeaccording to DIN 19522.With removable odor trap,Sealing water height 50 mm.With lip seal.With Variofix shallow bedupper section in ABSwith slotted cover 138 x 138 mmand rim in stainless steel,for tile thicknesses of 8-16 mm,Class L15 (able to withstand loadsup to max. 1.5 to).Ø 58Ø 78Ø 83Ø 110EN 125348 458.5148 478.5148 483.5148 411.51LGAType-testedand monitoredguaranteed withtested qualityAS 8 Catalog 2009

Floor/Roof drains Ecoguss ®For interior installation according to EN 1253 System 125Illustration and dimensioned drawing Article description Ø* Art. #Art. # 48 378.51with shallow bed gasketVariableupper sectionInstallation area 220 x 180 mmØ* 58 78 83 110B 245 134 134 148H 120 109 108 92Art. # 48 411.11Ø*HArt. # 48 378.11with connection flange58100Variableupper sectionInstallation area 180 x 180 mm7811083110with connection flangeVariableupper section110110Installation area 220 x 180 mmØ*B582457813483134110148H 120 109 108 92* Ø = Outer Diameter29132132312150150135150BB91min. 20max. 76Hmin. 12max. 68min. 10max. 18min. 40max. 96HHKESSEL Floor/Roof drainEcoguss ®Ø ..., lateral outlet 2.5°,1.8 l/sec flow ratefor connection to SML-pipeaccording to DIN 19522.With removable odor trap,Sealing water height 50 mm.With lip seal and protective coverfor use during construction.With Variofix shallow bedupper section in ABSwith slotted cover 138 x 138 mmand rim in stainless steel,for tile thicknesses of 8-16 mm,Class L15 (able to withstand loadsup to max. 1.5 to).KESSEL Floor/Roof drainEcoguss ®Ø ..., vertical outlet,1.8 l/sec flow ratefor connection to SML-pipeaccording to DIN 19522.With removable odor trap,Sealing water height 50 mm.With lip seal.With upper section in ABSwith slotted cover 138 x 138 mmin stainless steel, screwed,Class K3 (able to withstand loadsup to max. 300 kg).KESSEL Floor/Roof drainEcoguss ®Ø ..., lateral outlet 2.5°,1.8 l/sec flow ratefor connection to SML-pipeaccording to DIN 19522.With removable odor trap,Sealing water height 50 mm.With lip seal.With upper section in ABSwith slotted cover 138 x 138 mmin stainless steel, screwed,Class K3 (able to withstand loadsup to max. 300 kg).Ø 58Ø 78Ø 83Ø 110EN 1253Ø 58Ø 78Ø 83Ø 110EN 1253Ø 58Ø 78Ø 83Ø 110EN 125348 358.5148 378.5148 383.5148 311.51LGAType-testedand monitoredguaranteed withtested quality48 458.1148 478.1148 483.1148 411.11LGAType-testedand monitoredguaranteed withtested quality48 358.1148 378.1148 383.1148 311.11LGAType-testedand monitoredguaranteed withtested qualityFloor/Roof drainsEcoguss ®Bathroom drains/Shower channelsSystem 100Basement drainswith/without backwater protectionParking deck drains andBalcony/Roof/Rain/Yard drainsCatalog 2009AS 9

29107HFloor drains Practicus ®For interior installation according to EN 1253 System 125Floor drainsPracticus ®Bathroom drains/Shower channelsSystem 100Basement drainswith/without backwater protectionIllustration and dimensioned drawing Article description Ø* Art. #Art. # 45 219.64Ø*HArt. # 45 119.63with pressure sealing flangeVariableupper section50100Installation area 180 x 180 mm75110with pressure sealing flangeVariableupper sectionmin. 25max. 70min. 25max. 70110110Installation area 220 x 180 mmØ* 75 110B 134 148H 109 92273132135273132B107HH147KESSEL Floor drainPracticus ®in PP, Ø ..., vertical outlet,1.8 l/sec flow rateWith removable odor trap, Sealing waterheight 50 mm. With lip seal and protectivecover for use during construction.With pressure sealing flange andcounter flange in stainless steel.With upper section in ABS1 with oval design cover 120 x 120 mmand rim in stainless steel,with KESSEL Lock & Lift System.Class L15 (able to withstand loadsup to max. 1.5 to).2 with slotted cover 138 x 138 mmin stainless steel, screwedClass K3 (able to withstand loadsup to max. 300 kg).3 with slotted cover 138 x 138 mmand rim in stainless steel,screwedClass L15 (able to withstand loadsup to max. 1.5 to).KESSEL Floor drainPracticus ®in PP, Ø ..., lateral outlet 2.5°,1.8 l/sec flow rateWith removable odor trap, Sealing waterheight 50 mm. With lip seal and protectivecover for use during construction.With pressure sealing flange andcounter flange in stainless steel.With upper section in ABS1 with slotted design cover120 x 120 mmand rim in stainless steel,with KESSEL Lock & Lift System.Class L15 (able to withstand loadsup to max. 1.5 to).2 with slotted cover 138 x 138 mmin stainless steel, screwedClass K3 (able to withstand loadsup to max. 300 kg).1Ø 50Ø 75Ø 1102Ø 50Ø 75Ø 1103Ø 50Ø 75Ø 110EN 12531Ø 75Ø 1102Ø 75Ø 110EN 125345 259.6445 279.6445 219.6445 259.1145 279.1145 219.1145 259.4145 279.4145 219.41LGAType-testedand monitoredguaranteed withtested quality45 179.6345 119.6345 179.1145 119.11LGAType-testedand monitoredguaranteed withtested qualityParking deck drains andBalcony/Roof/Rain/Yard drainsArt. # 45 219.51Ø*H* Ø = Outer Diameterwith dual gasketVariable cover/Upper section50100Installation area 180 x 180 mm75110110110312138273min. 10max. 18min. 56max. 81KESSEL Floor drainPracticus ®in PP, Ø ..., vertical outlet,1.8 l/sec flow rateWith removable odor trap, Sealing waterheight 50 mm. With lip seal and protectivecover for use during construction.With pressure sealing flange andcounter flange in stainless steel.With Variofix shallow bedupper section in ABSwith slotted cover 138 x 138 mmand rim in stainless steel,for tile thicknesses of 8-16 mm,Class L15 (able to withstand loadsup to max. 1.5 to).Ø 50Ø 75Ø 110EN 125345 259.5145 279.5145 219.51LGAType-testedand monitoredguaranteed withtested qualityAS 10 Catalog 2009

Floor drains Practicus ®For interior installation according to EN 1253 System 125Illustration and dimensioned drawing Article description Ø* Art. #Art. # 45 210.54Ø*Hwith shallow bed gasketVariable cover/Upper section50100min. 40max. 96min. 10max. 23Installation area 180 x 180 mm75110110110312138DN13591H29KESSEL Floor drainPracticus ®in PP, Ø ..., vertical outlet,1.8 l/sec flow rateWith removable odor trap, Sealing waterheight 50 mm. With lip seal and protectivecover for use during construction.With Variofix shallow bedupper section in ABS1 with slotted design cover120 x 120 mmand rim in stainless steel,with KESSEL Lock & Lift System,for tile thicknesses of 8-21 mm2 with oval design cover120 x 120 mmand rim in stainless steel,with KESSEL Lock & Lift System,for tile thicknesses of 8-21 mm3 with slotted cover 138 x 138 mmand rim in stainless steel,for tile thicknesses of 8-16 mmClass L15 (able to withstand loads upto max. 1.5 to).1Ø 50Ø 75Ø 1102Ø 50Ø 75Ø 1103Ø 50Ø 75Ø 110EN 125345 250.5345 270.5345 210.5345 250.5445 270.5445 210.5445 250.5145 270.5145 210.51LGAType-testedand monitoredguaranteed withtested qualityFloor drainsPracticus ®Bathroom drains/Shower channelsSystem 100Art. # 45 110.51with shallow bed gasketVariable cover/Upper section29132312150Installation area 220 x 180 mmBmin. 10max. 18min. 40max. 96HKESSEL Floor drainPracticus ®in PP, Ø ...lateral outlet 2.5°,1.8 l/sec flow rateWith removable odor trap, Sealing waterheight 50 mm. With lip seal and protectivecover for use during construction.With Variofix shallow bedupper section in ABSwith slotted cover 138 x 138 mmand rim in stainless steel,for tile thicknesses of 8-16 mm,Class L15 (able to withstand loadsup to max. 1.5 to).Ø 75Ø 11045 170.5145 110.51Basement drainswith/without backwater protectionØ* 75 110B 134 148H 109 92EN 1253LGAType-testedand monitoredguaranteed withtested quality* Ø = Outer DiameterParking deck drains andBalcony/Roof/Rain/Yard drainsCatalog 2009AS 11

Floor drains Practicus ®For interior installation according to EN 1253 System 125Floor drainsPracticus ®Bathroom drains/Shower channelsSystem 100Basement drainswith/without backwater protectionIllustration and dimensioned drawing Article description Ø* Art. #Art. # 45 218.11Ø*HArt. # 45 118.41with glue flangeVariableupper section50100Installation area 180 x 180 mm75110with glue flangeVariableupper sectionmin. 30max. 70min. 30max. 70105105110110Installation area 220 x 180 mmØ* 75 110B 134 148H 107 90348138DN135348150BHH145KESSEL Floor drainPracticus ®in PP, Ø ...vertical outlet,1.8 l/sec flow rateWith removable odor trap, Sealing waterheight 50 mm. With lip, retaining ringand seal and protective cover for useduring construction.With glue flange and counter flange.With upper section made of polymer1 with slotted cover 138 x 138 mmin stainless steel, screwed,Class K3 (able to withstand loadsup to max. 300 kg).2 with slotted cover 138 x 138 mmand rim in stainless steel,screwed,Class L15 (able to withstand loadsup to max. 1.5 to).KESSEL Floor drainPracticus ®in PP, Ø ...lateral outlet 2.5°,1.8 l/sec flow rateWith removable odor trap, Sealing waterheight 50 mm. With lip, retaining ringand seal and protective cover for useduring construction.With glue flange and counter flange.With upper section made of polymer1 with slotted cover 138 x 138 mmand rim in stainless steel,screwed,Class L15 (able to withstand loadsup to max. 1.5 to).2 with slotted cover 138 x 138 mmin stainless steel, screwed,Class K3 (able to withstand loadsup to max. 300 kg).1Ø 50Ø 75Ø 1102Ø 75Ø 110EN 12531Ø 75Ø 1102Ø 75Ø 110EN 125345 258.1145 278.1145 218.1145 278.4145 218.41LGAType-testedand monitoredguaranteed withtested quality45 178.4145 118.4145 178.1145 118.11LGAType-testedand monitoredguaranteed withtested qualityParking deck drains andBalcony/Roof/Rain/Yard drains* Ø = Outer DiameterAS 12 Catalog 2009

Floor drains Practicus ®For interior installation according to EN 1253 System 125Illustration and dimensioned drawing Article description Ø* Art. #Art. # 45 210.40Ø*HArt. # 45 110.40with connection flangeVariableupper section50100Installation area 180 x 180 mm75110with connection flangeVariableupper section110110Installation area 220 x 180 mmØ* 75 110B 134 148H 109 92132150135150B91min. 20max. 76Hmin. 12max. 68HKESSEL Floor drainPracticus ®in PP, Ø ..., vertical outlet,1.8 l/sec flow rateWith removable odor trap, Sealing waterheight 50 mm. With lip seal and protectivecover for use during construction.With upper section in ABS1 with slotted cover 138 x 138 mmin ABS, black.2 with slotted cover 138 x 138 mmin stainless steel, screwed.3 with recessed polymer drain coverfor on-site tiling 110 x 110 mm,with locking system.Class K3 (able to withstand loads upto max. 300 kg).KESSEL Floor drainPracticus ®in PP, Ø ..., lateral outlet 2.5°,1.8 l/sec flow rateWith removable odor trap, Sealing waterheight 50 mm. With lip seal and protectivecover for use during construction.With upper section in ABS1 with slotted cover 138 x 138 mmin ABS, black.2 with slotted cover 138 x 138 mmin stainless steel, screwed.3 with recessed polymer drain coverfor on-site tiling 110 x 110 mm,with locking system.Class K3 (able to withstand loads upto max. 300 kg).1Ø 50Ø 75Ø 1102Ø 50Ø 75Ø 1103Ø 50Ø 75Ø 110EN 12531Ø 75Ø 1102Ø 75Ø 1103Ø 75Ø 110EN 125345 250.4045 270.4045 210.4045 250.1145 270.1145 210.1145 250.6645 270.6645 210.66LGAType-testedand monitoredguaranteed withtested quality45 170.4045 110.4045 170.1145 110.1145 170.6645 110.66LGAType-testedand monitoredguaranteed withtested qualityFloor drainsPracticus ®Bathroom drains/Shower channelsSystem 100Basement drainswith/without backwater protectionwith connection flangeVariableupper sectionmin. 81max. 181 50Installation area 180 x 180 mm* Ø = Outer Diameter150150135110202 min. 25max. 70KESSEL Floor drainPracticus ®in PP, Ø 75, vertical outlet,1.8 l/sec flow ratewith extension section Art. # 48 989with lateral inlet Ø 50.With removable odor trap, Sealing waterheight 50 mm. With lip seal and protectivecover for use during construction.With upper section in ABSwith slotted cover 138 x 138 mmin stainless steel, screwed,Class K3 (able to withstand loadsup to max. 300 kg).Ø 75EN 125345 270.11+ 48 989LGAType-testedand monitoredguaranteed withtested qualityParking deck drains andBalcony/Roof/Rain/Yard drainsCatalog 2009AS 13

Bathroom drains ,,The Ultraflat” System 125Bathroom drains,,The Ultraflat”Bathroom drains/Shower channelsSystem 100Basement drainswith/without backwater protectionIllustration and dimensioned drawing Article description Ø* Art. #min. 69min. 77min. 77for shallow bed gasket20013633 13054247with connection flange5454150130Art. # 45 700.631501302272278,58,5Art. # 45 700.71 40 50 50KESSEL Bathroom drain„The Ultraflat“for shallow bed gasketwith lowest installation heightin ABS, sound-absorbing, Ø 40lateral outlet 2.5°,0.6 l/sec flow rateWith removable odor trap.With upper section in ABSwith slotted cover 120 x 120 mmin stainless steel,Class K3 (able to withstand loadsup to max. 300 kg).KESSEL Bathroom drain„The Ultraflat“in ABS, sound-absorbing, Ø 50lateral outlet 2.5°With upper section in ABS1 With odor trap1.0 l/sec flow rateWith lip seal.with slotted design cover120 x 120 mmand rim in stainless steel,with KESSEL Lock & Lift System,Class K3 (able to withstand loadsup to max. 300 kg).With upper section made of polymer2 With Multistop: Odor, foam,rodent and insect stop0.9 l/sec flow ratewith cover in stainless steel120 x 120 mmClass K3 (able to withstand loadsup to max. 300 kg).Ø 40 45 740.201Ø 50 45 700.632Ø 50 45 700.71Parking deck drains andBalcony/Roof/Rain/Yard drains* Ø = Outer DiameterAS 14 Catalog 2009

Floor drains GiroFor interior installation according to EN 1253 System 125Illustration and dimensioned drawing Article description Ø* Art. #KESSEL Bathroom Giroin PP, sound-absorbing, Ø 50, flexible outlet, 1.3 l/sec flow rateWith removable odor trap, fixed lip seal.Inlet360° rotatableInlet360° rotatableInlet360° rotatableArt. # 45 101.64Art. # 45 101.54Art. # 45 104.53* Ø = Outer Diameterwith connection flangeVariableupper sectionflexibleoutletmin. 15max. 75110133241Installation area 350 x 250 mmwith shallow bed gasketVariable cover/Upper sectionflexibleoutlet109 312132241Installation area 350 x 250 mmwith shallow bed gasketVariable cover/Upper sectionflexibleoutlet10932 40132312132279Installation area 380 x 250 mm min. 10max. 23120 5050min. 10max. 23 50120With rotatable lateral inlet Ø 50With upper section in ABS1 with oval design cover 120 x 120 mmand rim in stainless steel,with KESSEL Lock & Lift System,Class L15 (able to withstand loadsup to max. 1.5 to).2 with slotted design cover120 x 120 mmand rim in stainless steel,with KESSEL Lock & Lift System,Class L15 (able to withstand loadsup to max. 1.5 to).3 with recessed cover for on-sitetiling 110 x 110 mm and rim instainless steel, with locking system,Class K3 (able to withstand loadsup to max. 300 kg).4 with slotted cover 120 x 120 mmClass K3 (able to withstand loadsup to max. 300 kg).With rotatable lateral inlet Ø 50With Variofix shallow bedupper section in ABS1 with oval design cover 120 x 120 mmand rim in stainless steel,for tile thicknesses of 8-21 mm,with KESSEL Lock & Lift System,Class L15 (able to withstand loadsup to max. 1.5 to).2 with slotted design cover120 x 120 mm and rim in stainlesssteel, for tile thicknesses of 8-21 mm,with KESSEL Lock & Lift System,Class L15 (able to withstand loadsup to max. 1.5 to).3 with recessed polymer drain coverfor on-site tiling 110 x 110 mmand rim in stainless steel,for tile thicknesses of 10 mm,with locking system,Class K3 (able to withstand loadsup to max. 300 kg).With 4 rotatable lateral inlets Ø 40With Variofix shallow bedupper section in ABS1 with slotted design cover120 x 120 mmand rim in stainless steel,for tile thicknesses of 8-21 mm,with KESSEL Lock & Lift System,Class L15 (able to withstand loadsup to max. 1.5 to).2 with oval design cover 120 x 120 mmand rim in stainless steel,for tile thicknesses of 8-21 mm,with KESSEL Lock & Lift System,Class L15 (able to withstand loadsup to max. 1.5 to).EN 12531Ø 50 45 101.642Ø 50 45 101.633Ø 50 45 101.654Ø 50145 101.2045 101.10Ø 50 45 101.542Ø 50 45 101.533Ø 50 45 101.551Ø 50 45 104.532LGAType-testedand monitoredguaranteed withtested qualityØ 50 45 104.54Floor drainsGiroBathroom drains/Shower channelsSystem 100Basement drainswith/without backwater protectionParking deck drains andBalcony/Roof/Rain/Yard drainsCatalog 2009AS 15

92 - 144 mm122 - 176 mm69 mm69 mmShower channel drains,,LINEARIS” Super 60 / ,,LINEARIS”Shower channel ,,LINEARIS” Super60 / Shower channel “LINEARIS” System 125Illustration and dimensioned drawing Article description Ø* Art. #KESSEL Shower channel „LINEARIS“ Super60 made of polymer, cover and rim in stainless steel,consisting of: Shower channel body in ABS, with perimeter flange for waterproof barrier connection,with installation supports, with tilable access cover and locking system.60 mmwith KESSEL Bathroom drain body„The Ultraflat“ in ABS, Ø 50,Lateral outlet 2.5°,37 l/min flow rate without threshold72 l/min flow rate with 10 mm threshold750 mm850 mm950 mm1150 mm45 700.8345 700.8445 700.8545 700.87L: 750 / 850 / 950 / 1150 mm140 mmmBathroom drains/Shower channelsSystem 100L: 750 / 850 / 950 / 1150 125 5045 mm57L: 750 + 90 / 850 + 90 / 950 + 90 / 1150 + 90min. 107max. 15157228162Basement drainswith/without backwater protectionIllustration and dimensioned drawing Article description Ø* Art. #KESSEL Shower channel „LINEARIS“ made of polymer, cover and rim in stainless steel,consisting of: Shower channel body in ABS, with perimeter flange for waterproof barrier connection,with installation supports, with tilable access cover and locking system.40 mmL: 750 / 850 / 950 / 1150 mmwith KESSEL Bathroom drain body„The Ultraflat“ in ABS, Ø 50,Lateral outlet 2.5°,24 l/min flow rate with 10 mmthreshold750 mm850 mm950 mm1150 mm45 700.7345 700.7445 700.7545 700.77140 mmm40 mmParking deck drains andBalcony/Roof/Rain/Yard drains* Ø = Outer Diameter 50AS 16 Catalog 2009

Floor/Bathroom/Roof drains System 125UUpper sectionAAccessoriesBDrain bodyBEcoguss ®Lateral outletØ 58 Art. # 48 358Ø 78 Art. # 48 378Ø 83 Art. # 48 383Ø 110 Art. # 48 311Vertical outletØ 58 Art. # 48 458Ø 78 Art. # 48 478Ø 83 Art. # 48 483Ø 110 Art. # 48 411Practicus ® in PPLateral outletØ 50 Art. # 45 150Ø 75 Art. # 45 170Ø 110 Art. # 45 110Vertical outletØ 50 Art. # 45 250Ø 75 Art. # 45 270Ø 110 Art. # 45 210Choose a drain body:„The Ultraflat“ in ABS *,with sealing flangeLateral outlet 2.5°, Ø 40Lateral outlet, Ø 40Art. # 45 740„The Ultraflat“ in ABSLateral outlet 2.5°, Ø 50 / Ø 75Lateral outlet, Ø 50Art. # 45 700Lateral outlet, Ø 75Art. # 45 770With lateral inlet Ø 40Lateral outlet 2.5°, Ø 50Art. # 45 701KESSEL-modular designCombinations for any installation requirementFloor Drains Bathroom drains Bathroom drains*) not in combination withArt. # 48 908, 48 909, 48 910, 48 912and Art. # 46 908, 46 909, 46 910, 46 912Giro in PPOne lateral inletØ 50 Art. # 45 101Giro in PPFour lateral inletsØ 40 Art. # 45 104Modular design 125Floor/Bathroom/Roof drainsBathroom drains/Shower channelsSystem 100AChoose one or more accessories as required:Glue flange with counter flangeArt. # 48 410replaces article 48 401348Pressure sealing flange in stainless steel*Art. # 48 402Ideal23waterproofconcrete+ Elastomer waterproof membrane in NBR Art. # 48 981*) Cannot be combined with „The Ultraflat“ Art. # 45 700, 45 770 and 45 740for30Extension section in PPwith lip sealwithout lateral inletArt. # 48 987Extension section in PPwith lip sealwith lateralinlet Ø 50Art. # 48 98913613615012515012535158 50106Basement drainswith/without backwater protectionQuick-Fitthe passage seal for core drilling forEcoguss ® - and Practicus ® -drain body vertical outletwith fire protection Art. # 48 990without fire protection Art. # 48 991Fire protection insert Fire-Kitfor vertical drainsArt. # 48 10076Illustration showsArt.Nr. 48 99042Multistop*as an odor, foam, rodentand insect stopArt. # 48 500Hair filtermade of polymerArt. # 48 7003914120*) when combined with Art. # 45 740 min. height of drain body increases to 77 mm122Parking deck drains andBalcony/Roof/Rain/Yard drainsCatalog 2009AS 17

572193912040min. 10max. 1812040min. 25max. 3512040min. 18max. 23100251204090min. 18max. 2316Modular design 125Floor/Bathroom/Roof drainsFloor/Bathroom/Roof drains System 125UChoose an upper section:Variofix shallow bed upper section in ABS...Class L 15312132Upper section in ABS...Class L 15KESSEL-modular designCombinations for any installation requirement132with slotted design cover 120 mm and rim in stainless steel,Lock & Lift System, for tile thicknesses of 8-21 mm. Art. # 48 904125Art. # 48 201 Art. # 48 202with Lock & Lift Systemwith slotted design cover 120 mm in stainless steel,Art. # 48 201with oval design cover 120 mm in stainless steel, Art.#48 202125Parking deck drains andBalcony/Roof/Rain/Yard drainsBasement drainswith/without backwater protectionBathroom drains/Shower channelsSystem 100Variofix shallow bed upper section in ABS...Class L 15312132with oval design cover 120 mm and rim in stainless steel,Lock & Lift System, for tile thicknesses of 8-21 mm. Art. # 48 905125Variofix shallow bed upper section in ABS...Class K 3312132110Upper section in ABS...Class K 3Art. # 48 210 Art. # 48 211with locking system, for tile thickness 10 mm,with recessed polymer cover for on-site tiling 110 mm,Art. # 48 210with recessed polymer cover for on-site tiling 110 mm,rim in stainless steel, Art. # 48 211Upper section in ABS...Class K 3130110125Art. # 48 950 Art. # 48 193with recessed cover for on-site tiling 110 mm, frame in stainlesssteel, for tile thickness 10 mm, with locking system. Art. # 48 906with slotted cover/rim 150 mm in stainless steel, screwed,for tile thickness of 8-16 mm. Art. # 48 963125Variofix shallow bed upper section in ABS...Class L 15Upper section in stainless steel...Class K 3 Class L 15 / M 125312150125with black slotted cover 138 mm in ABS, Art. # 48 193with slotted cover 138 mm in stainless steel,screwed Art. # 48 950Upper section in ABS...*Class K 3with slotted cover 120 mm in stainless steel, Art. # 48 165*) Only in combination with drain body “The Ultraflat“Upper section in ABS / stainless steel...*Class L 15150Art. # 48 977 Art. # 48 177with cover 138 mm in stainless steel,slotted cover, screwed Art. # 48 977 cover Art. # 48 177Shower channel upper section „LINEARIS“ Super60in ABSClass K 360 mmChannel length:750 mm Art. # 48 908850 mm Art. # 48 909950 mm Art. # 48 9101150 mm Art. # 48 912L: 750 / 850 / 950 / 1150 mm140 mm45 mmwith slotted cover 138 mm frame in stainless steel,screwed, Art. # 48 951*) Only in combination with drain body “The Ultraflat“Shower channel upper section „LINEARIS“ in ABSClass K 340 mmChannel length:750 mm Art. # 46 908850 mm Art. # 46 909950 mm Art. # 46 9101150 mm Art. # 46 912L: 750 / 850 / 950 / 1150 mm140 mm12540 mmAS 18 Catalog 2009

Bathroom drains / Shower channelsfor interior installationSystem 100Parking deck drains andBalcony/Roof/Rain/Yard drainsBasement drainswith/without backwater protectionFloor/Bathroom/Roof Drains/Shower Channel System 125Bathroom / Shower channelsSystem 100Catalog 2009AS 19

Floor/Bathroom/Roof Drains/Shower Channel System 125Bathroom drains„The Superflat”Basement drainswith/without backwater protectionParking deck drains andBalcony/Roof/Rain/Yard drainsBathroom drains ,,The Superflat” System 100Illustration and dimensioned drawing Article description Ø* Art. #min. 104max. 112Art. # 42 701.913280Art. # 42 701.5486with shallow bed gasket9786 4038 40Art. # 42 701.95* Ø = Outer Diameter 332107Variableupper section 50min. 19max. 2765Installation area 260 x 180 mmwith shallow bed gasket312120110118 130min. 10max. 23 50Variable cover/Upper sectionflexibleoutletmin. 45max. 110Installation area 260 x 180 mmwith glue flange332132110248min. 25max. 90 505065flexibleoutletVariableupper sectionflexibleoutletInstallation area 260 x 180 mmKESSEL Bathroom drain„The Superflat“for shallow bed gasketwith lowest installation heightin PP, sound-absorbing, Ø 50flexible outlet, 0.9 l/sec flow rateWith removable odor trap.With lateral inlet Ø 40 and fixed lip seal.No lateral adjustmentof the slotted coverWith upper section in ABSwith slotted cover95 x 95 mm in stainless steel,Class K3 (able to withstand loadsup to max. 300 kg).KESSEL Bathroom drain„The Superflat“in PP, sound-absorbing, Ø 50flexible outlet, 0.9 l/sec flow rateWith removable odor trap.With lateral inlet Ø 40 and fixed lip seal.With Variofix shallow bedupper section in ABSwith oval design cover 120 x 120 mmand rim in stainless steel,for tile thicknesses of 8-21 mm,Class L15 (able to withstand loadsup to max. 1.5 to),with KESSEL Lock & Lift System.with standard slotted cover95 x 95 mm in stainless steel,for tile thicknesses of 6-14 mm,Class K3 (able to withstand loadsup to max. 300 kg).with recessed cover for on-sitetiling 110 x 110 mm and rim instainless steel, Class K3 (able towithstand loads up to max. 300 kg),with locking system.KESSEL Bathroom drain„The Superflat“in PP, sound-absorbing, Ø 50flexible outlet, 0.9 l/sec flow rateWith removable odor trap.With lateral inlet Ø 40 and fixed lip seal.With glue flange and counter flangeWith upper section in ABSwith recessed polymer drain coverfor on-site tiling 110 x 110 mmand rim in stainless steel,Class K3 (able to withstand loadsup to max. 300 kg),with locking system,for tile thickness up to 10 mm.Ø 50 42 701.91Ø 50 42 701.54Ø 50 42 701.50Ø 50 42 701.55Ø 50 42 701.95AS 20 Catalog 2009

Bathroom drains ,,The Superflat” System 100Illustration and dimensioned drawing Article description Ø* Art. #min. 10max. 6080Art. # 42 701.20Art. # 40 150.54with connection flange107250Variableupper sectionInstallation area 260 x 180 mmwith shallow bed gasket90 312132110 50min. 10Variable cover/Upper sectionInstallation area 220 x 180 mmmax. 110Floor/Bathroom/Roof Drains/Basement drainsBathroom drainsmin. 45 max. 23with/without backwater protection„The Superflat” / ClassicShower Channel System 125flexibleoutletKESSEL Bathroom drain„The Superflat“in PP, sound-absorbing, Ø 50flexible outlet, 0.9 l/sec flow rateWith removable odor trap.With lateral inlet Ø 40 and fixed lip seal.With upper section in ABSwith slotted cover 100 x 100 mmin stainless steel,min. installation height 90 mm,Class K3 (able to withstand loadsup to max. 300 kg).with recessed cover for on-sitetiling 110 x 110 mm,Class K3 (able to withstand loadsup to max. 300 kg),with locking system.KESSEL Bathroom drain Classicin ABS, Ø ...lateral outlet 2.5°, 0.9 l/sec flow ratein ABS, Ø ...vertical outlet, 0.9 l/sec flow rateWith removable odor trap,Sealing water height 50 mm.With fixed lip seal.With Variofix shallow bedupper section in ABS1 with oval design cover120 x 120 mmand rim in stainless steel,for tile thicknesses 8-21 mm,with KESSEL Lock & Lift System,Class L15 (able to withstand loadsup to max. 1.5 to).2 with standard slotted cover95 x 95 mm in stainless steel,for tile thicknesses 6-14 mm,Class K3 (able to withstand loadsup to max. 300 kg).3 with slotted cover 138 x 138 mmand rim,for tile thicknesses 8-16 mm,Class L15 (able to withstand loadsup to max. 1.5 to).Ø 50 42 701.20Ø 50 42 701.66Floor/Bathroom drains Classic System 100Illustration and dimensioned drawing Article description Ø* Art. #1Lateral outletØ 50 40 150.54Ø 75 40 170.54Vertical outletØ 50 40 250.54Ø 75 40 270.542Lateral outletØ 50 40 150.50Ø 75 40 170.50Vertical outletØ 50 40 250.50Ø 75 40 270.503Lateral outletØ 50Ø 75Vertical outletØ 50Ø 7540 150.5140 170.5140 250.5140 270.51* Ø = Outer DiameterParking deck drains andBalcony/Roof/Rain/Yard drainsCatalog 2009AS 21

Floor/Bathroom/Roof Drains/Shower Channel System 125Bathroom drains ClassicBasement drainswith/without backwater protectionParking deck drains andBalcony/Roof/Rain/Yard drainsFloor/Bathroom drains Classic System 100Illustration and dimensioned drawing Article description Ø* Art. #Art. # 40 159.50Art. # 40 250.90Art. # 40 150.66* Ø = Outer Diameterwith dual gasket90 332 312100Variable cover/Upper sectionmin. 8max.16Installation area 260 x 180 mmwith glue flange152141Variableupper section 332107min. 20max. 60Installation area 180 x 180 mmwith connection flange90Variableupper section130110185min. 25max. 90Installation area 220 x 180 mmmin. 55max.120KESSEL Bathroom drain Classicin ABS, Ø ...lateral outlet 2.5°,0.9 l/sec flow ratein ABS, Ø ...vertical outlet,0.9 l/sec flow rateWith removable odor trap,Sealing water height 50 mm.With fixed lip seal.With glue flange and counter flangeWith Variofix shallow bedupper section in ABSwith slotted cover 95 x 95 mmin stainless steel,for tile thickness 6-14 mm,Class K3 (able to withstand loadsup to max. 300 kg).KESSEL Bathroom drain Classicin ABS, Ø ...lateral outlet 2.5°,0.9 l/sec flow ratein ABS, Ø ...vertical outlet,0.9 l/sec flow rateWith removable odor trap,Sealing water height 50 mm.With fixed lip seal.With glue flange and counter flangeWith upper section in ABSwith slotted cover 100 x 100 mmin stainless steel,Class K3 (able to withstand loadsup to max. 300 kg).KESSEL Bathroom drain Classicin ABS, Ø ...lateral outlet 2.5°,0.9 l/sec flow ratein ABS, Ø ...vertical outlet,0.9 l/sec flow rateWith removable odor trap,Sealing water height 50 mm.With fixed lip seal.With upper section in ABS1 with recessed polymer drain coverfor on-site tiling 110 x 110 mm,Class K3 (able to withstand loadsup to max. 300 kg),with locking system.2 with slotted cover 100 x 100 mmin stainless steel,Class K3 (able to withstand loadsup to max. 300 kg).Lateral outletØ 50 40 159.50Ø 75 40 179.50Vertical outletØ 50 40 259.50Ø 75 40 279.50Lateral outletØ 50 40 150.90Ø 75 40 170.90Vertical outletØ 50 40 250.90Ø 75 40 270.901Lateral outletØ 50Ø 75Vertical outletØ 50Ø 752Lateral outletØ 50Ø 75Vertical outletØ 50Ø 7540 150.6640 170.6640 250.6640 270.6640 150.2040 170.2040 250.2040 270.20AS 22 Catalog 2009

105 - 150 mm112 - 160 mm80 mm90 mmShower channel drains ,,LINEARIS” System 100Illustration and dimensioned drawing Article description Ø* Art. #KESSEL Shower channel „LINEARIS“ made of polymer, cover and rim in stainless steel,consisting of: Shower channel body in ABS, with perimeter flange for waterproof barrier connection,with installation supports, with tilable access cover and locking system.40 mmL: 750 / 850 / 950 / 1150 mm140 mmwith KESSEL Bathroom drain bodyClassic in ABS, Ø 50,Lateral outlet 2.5°,Flow rate:24 l/min. with 10 mm thresholdClass K3 (able to withstand loads upto max. 300 kg).750 mm 40 150.83850 mm 40 150.84950 mm 40 150.851150 mm 40 150.87Floor/Bathroom/Roof Drains/Shower Channel System 12540 mm40 mm 50L: 750 /850/950 / 1150 mm140 mm21with KESSEL Bathroom drain body„The Superflat“ in PP,sound-absorbing, Ø 50,flexible lateral outlet,1 inlet Ø 40,Flow rate:24 l/min. with 10 mm thresholdClass K3 (able to withstand loads upto max. 300 kg).750 mm 42 701.83850 mm 42 701.84950 mm 42 701.851150 mm 42 701.87Shower channel drains ,,LINEARIS”40 mm* Ø = Outer DiameterAccess opening can be tiled. 5021Basement drainswith/without backwater protectionParking deck drains andBalcony/Roof/Rain/Yard drainsCatalog 2009AS 23

Floor/Bathroom/Roof Drains/Shower Channel System 125Floor/Bathroom/Roof drains System 100UUpper sectionAB„The Superflat“in PPChoose a drain body:sound-absorbing, flexible lateral outlet Ø 50With removable odor trapand fixed lip seal.110KESSEL-modular designCombinations for any installation requirementClassicin ABSOutlet Ø 50/75With removable odor trap (50 mm)and fixed lip seal.156129Modular design 100Floor/Bathroom/Roof drainsAccessoriesBDrain bodyWithout lateral inlet,with socket supports Ø 40.Art. # 42 7008032One lateral inlet Ø 40,with socket supports Ø 40.Art. # 42 70180 40130110118 130 504469 504469Lateral outletwith odor trapØ 50 Art. # 40 150Ø 75 Art. # 40 170Vertical outletwith odor trapØ 50 Art. # 40 250Ø 75 Art. # 40 2709013518415612965AChoose one or more accessories as required:Glue flangeExtension section in ABSBasement drainswith/without backwater protectionwith counter flangeArt. # 43 401Extension section in ABSwith glue flange andcounter flangeArt. # 27 199Extension section in PPwith pressure sealing flange in stainless steel,Flange width 63 mmArt. # 27 19833239with lip sealArt. # 27 146Multistop*as an odor, foam, rodent and insect stopArt. # 43 500*) Not for use with Art. # 27 165 and 47 901Hair filtermade of polymerArt. # 43 70014 37105109Parking deck drains andBalcony/Roof/Rain/Yard drainsElastomer waterproof membrane*in PVC Art. # 43 710in EPDM Art. # 43 730*) The waterproof membrane in PVCand EPDM are not suitablefor connections to asphalt sheeting.500 mmWith glue flange and pre-mounted waterproof membrane in PVC1200 x 1200 mm Art. # 43 401.911800 x 2000 mm Art. # 43 401.93Waterproof membrane in PVC1800 x 2000 mm Art. # 43 711without punched-out holeGlue Art. # 43 719AS 24 Catalog 2009

Floor/Bathroom/Roof drains System 100UChoose an upper section:Variofix shallow bed upper section in ABS...Class K 340312100min. 10max. 16120Upper section in ABS...Class K 3KESSEL-modular designCombinations for any installation requirementFloor/Bathroom/Roof Drains/Shower Channel System 125110with standard slotted cover 95 mm in stainless steel. Art. # 47 901Variofix shallow bed upper section in ABS...Class L 15312150min. 10max. 18with slotted cover 100 mm in stainless steel. Art. # 27 165Upper section in ABS...Class L 1540with slotted cover/rim 150 mm in stainless steel,screwed, for tile thicknesses of 8-16 mm. Art. # 47 902Variofix shallow bed upper section in ABS...Class L 1540110312132110120min. 18max. 23120with slotted cover 150 mm and rim in stainless steel,non-slip Art. # 27 176Upper section in ABS...Class L 151613211090Modular design 100Floor/Bathroom/Roof drainswith slotted design cover 120 mm and rim in stainless steel,Lock & Lift System, for tile thicknesses of 8-21 mm. Art. # 47 904with slotted design cover 120 mm in stainless steel,Lock & Lift System. Art. # 27 201Variofix shallow bed upper section in ABS...Class L 1540with oval design cover 120 mm and rim in stainless steel,Lock & Lift System, for tile thicknesses of 8-21 mm. Art. # 47 90540312132110312132110min. 18max. 23Variofix shallow bed upper section in ABS...Class K 3120min. 25max. 35120Upper section in ABS...Class L 15with oval design cover 120 mm in stainless steel,Lock & Lift System. Art. # 27 202Upper section in ABS...Class K 3162513211013211090100Basement drainswith/without backwater protectionwith recessed polymer cover110for on-site tiling 110 mm, rim in stainless steel,for tile thickness 10 mm, with locking system. Art. # 47 906with recessed polymer cover for on-site tilingRim made of polymer Art. # 27 210with tile thickness 10 mm, with locking system.110 mm,Shower channel upper section „LINEARIS“ in ABSClass K 340 mmChannel length:750 mm Art. # 27 808850 mm Art. # 27 809950 mm Art. # 27 8101150 mm Art. # 27 812L: 750 / 850 / 950 / 1150 mm140 mm40 mm21Upper section in ABS...Class K 325132110100with recessed polymer cover for on-site tilingRim in stainless steel Art. # 27 211with tile thickness 10 mm, with locking system.110 mm,Parking deck drains andBalcony/Roof/Rain/Yard drainsCatalog 2009AS 25

AS 26 Catalog 2009

Basement drainswith/without backwater protectionIdealforwaterproofconcreteParking deck drains andBalcony/Roof/Rain/Yard drainsBasement drainswith/without backwater protectionFloor/Bathroom/Roof Drains/Shower Channel System 125Bathroom drains/Shower channelsSystem 100Catalog 2009AS 27

Floor/Bathroom/Roof Drains/Shower Channel System 125Bathroom drains/Shower channelsSystem 100Basement drain „The Universal“ made of polymer Ø 110with/without twin flap backwater valve and odor trapFor interior installation according to EN 1253Illustration and dimensioned drawing186 67Ideal for new buildings!7060230200380Variableupper section30-8011073Art. # 27 621 Installation area 400 x 320 mm* Ø = Outer DiameterAccessoriesArticle descriptionKESSEL Basement drain„The Universal“with/without twin flap backwatervalve and odor trapin PP, Ø 110Lateral outlet 2.5°, 1.8 l/sec flow rateWith 2 inlets Ø 50, 1 inlet Ø 75.With/without removable twin flap backwatervalve and emergency closure which can belocked by hand.Odor trap height 60 mm,with removable sludge trap.With telescopically height adjustable uppersection made of polymer1 slotted cover 200 x 200 mmmade of polymer, black.2 slotted cover 200 x 200 mmand rim in stainless steel, screwed.Class K3 (able to withstand loads up tomax. 300 kg).According to EN 13564 Type 5.EN 1253LGAType-testedand monitoredguaranteed withtested qualityØ*IdealwaterproofconcreteArt. #With twin flap backwater valve:1 Ø 110 27 6112 Ø 110 27 621Without twin flap backwater valve:1 Ø 110 29 1112 Ø 110 29 121Ideal for renovation:Basement drain Drehfix ®Page AS 29for15032019812 - 25Variofix shallow bed upper sectionin ABSwith slotted cover and rim 200 x 200 mmin stainless steel, screwed, Class K3- 48968200Basement drainsmade of polymer198Sealed with respect to floor moisture1502582003202022004430 Upper section in Ecoguss ®with slotted cover in Ecoguss ® Ø 230 mmClass B125/M125(able to withstand loads up to max. 12.5 to)Extension sectionin ABSwith pressure sealing flangeand counter flangeH = 150 mm- 67985- 27298Parking deck drains andBalcony/Roof/Rain/Yard drainsFor installation in waterproof concrete3017536520420046166Extension section in Ecoguss ®with pressure sealing flangeand counter flangeH = 166 mm+ Elastomer waterproof membranein NBRExtension sectionin ABSH = 175 mm, with lip sealRodent protectionin stainless steelIdealforwaterproofconcrete- 48958- 48982- 48988- 27609AS 28 Catalog 2009

Basement drain Drehfix ® made of polymer Ø 110with/without twin flap backwater valve and odor trapFor interior installation according to EN 1253Illustration and dimensioned drawing Article description Ø*Art. #Ideal for renovation!min. 25max. 55185285168 x 21019011030Art. # 27 301Installation area 320 x 190 mmAccessories210 x 167200 x 15914KESSEL Basement drain Drehfix ®with/without twin flap backwater valveand odor trapin ABS, Ø 110lateral outlet 2.5°,1.8 l/sec flow rateWith/without removable twin flap backwatervalve and emergency closure which can belocked by hand.With odor trap.With removable sludge trap and integrated,height adjustable upper section.with slotted cover 150 x 190 mmmade of polymer, black,with Easy Entry Function.Class K3 (able to withstand loadsup to max. 300 kg).According to EN 13564 Type 5.EN 1253LGAType-testedand monitoredguaranteed withtested qualityExtension sectionmade of polymer blackH = 183 mmWith twin flap backwater valve:Ø 110 27 301Without twin flap backwater valve:Ø 110 33 101- 38 670Floor/Bathroom/Roof Drains/Shower Channel System 125183Bathroom drains/Shower channelsSystem 100189 x 148Art. # 39 005 50 75 110677190Inlet sectionsmade of polymerincl. flat sealHole sawfor drilling lateral surfaces for inlets and outletsØ 50, 75, 110(Saw blade holder Ø = 145 mm)Ø 50Ø 75Ø 110390053900739100- 50 101Basement drainsmade of polymerRodent protectionin stainless steel- 27609* Ø = Outer DiameterParking deck drains andBalcony/Roof/Rain/Yard drainsCatalog 2009AS 29

Floor/Bathroom/Roof Drains/Shower Channel System 125Basement drains made of polymer Ø 75 / Ø 110with/without odor trapFor interior installation according to EN 1253Illustration and dimensioned drawingArticle descriptionKESSEL Basement drainin PP, Ø 110Lateral outlet 2.5°, 1.6 l/sec flow rateWith removable odor trap and sludge trap.With upper section in PPwith slotted cover 150 x 150 mmmade of polymer, black.Class K3 (able to withstand loadsup to max. 300 kg).Ø*Art. #Black design:Ø 110 36 501White design:Ø 11036 501wArt. # 36 501Installation area 220 x 280 mmEN 1253LGAType-testedand monitoredguaranteed withtested qualityBathroom drains/Shower channelsSystem 100Basement drainsmade of polymerArt. # 45 110.40Accessories* Ø = Outer Diameter132150min. 12max. 68Installation area 220 x 180 mmØ* 75 110B 134 148H 109 92AccessoriesB 120HExtension sectionmade of polymer, blackCan be extended by 80 mmKESSEL Basement drainin PP, Ø ...,Lateral outlet 2.5°/vertical1.8 l/sec flow rateWith/without removable odor trap.With lip seal and protective coverfor use during construction.With upper section in ABSwith slotted cover 138 x 138 mmin ABS, black.Class K3 (able to withstand loadsup to max. 300 kg).EN 1253LGAType-testedand monitoredguaranteed withtested qualityMultistopas an odor, foam, rodent and insect stop- 36 5901 Lateral outletWith odor trap:Ø 75Ø 110Without odor trap:45 170.4045 110.40Ø 110 34 1012 Vertical outletWith odor trap:Ø 75Ø 11045 270.4045 210.40- 48 50039 122Hair filtermade of polymer- 48 7001434829Glue flangewith counter flange- 48 401Parking deck drains andBalcony/Roof/Rain/Yard drains1361501253530Pressure sealing flangein stainless steel+ Elastomer waterproofmembrane in NBRExtension sectionin ABSwith lip sealwithout lateral inletIdealwaterproofconcretefor- 48402- 48981- 48 987AS 30 Catalog 2009