Download specification

SPECIFICATIONS: MCT 360-T TransmitterMeasurement Range:Measurement Accuracy:Repeatability:Transmitter/Product Distance:Calibration Codes:Response Time:Power:Outputs:Weight:Ambient Temperature:Enclosure:Window Purge:Options:OPERATOR INTERFACE: Wall or Post MountingDisplay:Languages:Power:Cable:Keypad:Enclosure:0-60%+/- 0.1% to 0.5% depending on tobacco type+/- 0.15%8-18 inches (200-450mm)1001-999 seconds. Three modes availableDamping, Integration and Gated.90-260VAC 50/60 Hz, 40 watts24VDC optional4-20 mA, 0-10 V (isolated), RS232 & RS48521 lbs. (10 Kg)0-50˚ C (32-120˚ F) with wateror air cooling up to 80˚ C (160˚ F).IP65, Cast AluminumAirpurge Diffuser requires 5 psi and 2 l/mAlarm relay output; relay closure for alarm conditionColor Touch Screen LCD orAlphanumeric Vacuum Fluorescent withreadout in % moisture and temperatureUser selectable (Spanish, French, German,Portuguese, Italian, Polish, Russian, Chinese, etc.)From MCT 360-T Transmitter10 ft. (3 meters) standard, longer on requestAccess to MCT 360-T settings, including calibrations,product codes and diagnosticsCast Aluminum7.50” (191 mm)DIMENSIONS: MCT 360-T Transmitter3.062”(77.77 mm)Operator Interface - Touch ScreenFRONT VIEW3.687”(93.65 mm)12.50” (317.50 mm)Vacuum FlourescentFRONT VIEWSENSOR OPTICS11.00” (279.40 mm)SIDE VIEWALL POWER ANDINTERFACE CONNECTORSON REAR PANEL2.00”(50.80 mm)REAR VIEW(31.75 mm)1.25”BOTTOM VIEW10.90” (277 mm)4.63”(117.60 mm)3.45”(88 mm)1.312” (33.3 mm)DIA. FOR MOUNTING POST(50.80 mm)2.0”6.90”(175 mm)3.00”(76.20 mm)0.31TYPICAL4 Holes10.00” (254 mm)REMOTE TO SENSORINTERFACE CONNECTOR12.50 “(317.50 mm)TOP VIEW6.50”(165 mm)3.00”(76.20 mm)2.94”(74.68 mm)Maintenance:Warranty:Routine:Calibration:Calibration Verification:CE Compliance:24 months for all parts and labor.None required.Pre-calibrated, no recalibration needed.Calibration Check StandardsRemote Display/Sample Average UnitFRONT VIEWEMC directives EN50081-1 & EN50082-2, EN61010-1 Low Voltage directive.Data Bus & Software Interfaces:6.50”(165 mm)TOP VIEW2.5”(63.5 mm)3.00”(76.20 mm)Optional Plug In Interfaces:Software:Ethernet TCP/IP, DeviceNet,Profibus, Modbus.Windows-based stand-alone programor OPC-DDE serverDisplay:Pushbutton:Enclosure:10.00”(254 mm)Alpha-Numeric DisplayGrab Sample AverageCast AluminumFor more information on Process Sensors instruments and accessories, visit our website at: - Process Sensors Corporation113 Cedar Street Milford, MA 01757 USATel: (508) 473-9901 | Fax: (508) 473-0715info@processsensors.com - Process Sensors EuropeUnit 4, Adelaide House Corbygate Business ParkCorby, Northants NN17 5JG United KingdomTel: 01536 408066 | Fax: 01536 407813infouk@processsensors.com - Process Sensors PolskaBiuro Informacyjne Techniki Pomiarowej03-980 Warszawa ul. Znanieckiego 16/23 PolandTel: (48) 22 6739526 | Fax: (48) 22 6739527tomasz@processsensors.com