PG Plus Product Bulletin FM040601Rev1.qxd
PG Plus Product Bulletin FM040601Rev1.qxd
PG Plus Product Bulletin FM040601Rev1.qxd
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>PG</strong><strong>Plus</strong> is a high performance fully formulated Extended Life Propylene GlycolCoolant. It is an environmentally safe, biodegradable and non - toxic fluid. Ittherefore does not require a Poisons Schedule Number, Dangerous GoodsClass or Hazchem Code.<strong>PG</strong><strong>Plus</strong> is the answer to today's maintenance demands for heavy-duty dieselcooling systems. To gain maximum benefit from <strong>PG</strong><strong>Plus</strong> it should be used inconjunction with ES Slow Release Filters or with ES Extender and onlyrequires re-inhibition each 250,000 klms. (150,000 miles) or 4,000 operationhours or 1 year, which ever arrives first.It is the perfect mixture that protects your cooling system by preventing scaling,foaming, corrosion, liner and pump pitting (SAE 900434). It also providesimproved pump seal life over that of the same ethylene glycol (EG) formulatedcoolants (SAE 961818). <strong>PG</strong><strong>Plus</strong> is easy to use, cost effective, and withDCA4+ inhibitor package, it will outperform other extended life coolant productsin the market place today.<strong>PG</strong><strong>Plus</strong> Premix<strong>PG</strong><strong>Plus</strong> ConcentrateCC2870 4 Ltr CC2657 4 LtrCC2871 10 Ltr CC2658 10 LtrCC2869 20 Ltr CC2659 20 LtrCC2868 208 LtrCC2867 1000 LtrCC2866 20000 LtrFLEETGUARD <strong>PG</strong><strong>Plus</strong> Coolant formulations that contain a controlled mix ofconventional heavy-duty chemical inhibitors, safe organic corrosion inhibitors(DCA4+) and Propylene Glycol (<strong>PG</strong>) . They are designed specifically forExtended Service use in heavy-duty diesel engines. However, if required,<strong>PG</strong><strong>Plus</strong> can be maintained at the conventional engine service interval usingWF2070 series coolant filters or proportional amount of ES Extender.<strong>PG</strong><strong>Plus</strong> is formulated with the highest liner pitting protection available in themarketplace. With low TDS and silicate levels, <strong>PG</strong><strong>Plus</strong> is specifically designedfor use with ES Slow Release coolant filters or liquid ES Extender to providesimplified coolant maintenance while extending coolant service intervals wellbeyond conventional service intervals<strong>PG</strong><strong>Plus</strong> PREMIX is factory formulated using deionized water and is ready touse. It is ideal for system top offs and negates possibility of wrong mixing.<strong>PG</strong><strong>Plus</strong> CONCENTRATE mixes readily with clean soft water 1:1 or if usedstraight can be used to economically adjust the glycol level if required.
TECHNICAL SPECIFICATIONS> <strong>PG</strong><strong>Plus</strong> coolants are universal products highly recommended for use in all heavy-duty diesel engines,automobile and light duty applications.> <strong>PG</strong><strong>Plus</strong> meets or exceeds the performance requirements of the following specifications, and meets thelow silicate limits of GM6038M, ASTM D 4985 and TMC RP 330 antifreeze formulation requirements.> <strong>PG</strong><strong>Plus</strong> does not require additional silicate to be added as do some other coolants in someapplications.ASTM D 6210-03ASTM D 4985CaseCaterpillarCID-A-A-52624Cummins S/B 36666132, 3666286Cummins CES 14603Detroit Diesel 7SE298EMD M.I.1748D/ EEMD MI 1796MTU-MTL5049TYPICAL PROPERTIES<strong>PG</strong><strong>Plus</strong> Concentrate <strong>PG</strong><strong>Plus</strong> PremixColour Visual Royal Blue Royal BlueSpecific Gravity @ 20ºC D1122 1.04 min. 1.02 minpH (Undiluted) D1287 10.5 10.5Reserve Alkalinity (Undiluted) D1121 10.0 5.0 min.Freeze Point, ºC (Undiluted) D1177 < -51 min.. -22 min.Boiling Point, ºC (Undiluted) D1120 188 min. 105 min. Open SystemBoiling Point, ºC (Undiluted)125 min Closed System@ 14lb/62N Pressure CapGlassware Corrosion Test D1384 Pass PassWater Pump Cavitation Test D2809 Pass PassAluminium Corrosion Test D4340 Pass PassSimulated Service Test D2570 Pass PassAsh Content, mass % D1119 5.0 max. 2.5 max.Chloride wt% (ppm) -------- 25 max. 25 max.TOXICITY & REGULATORY STATUSFreightliner 48-22880International / NavistarJohn Deere JDM-H24MackMitsubishi US/AL01-001New HollandPaccarTMC RP 330 & 338VolvoWaukesha 4-1974DJIS K-2234Fleetguard 2006 - FM040601REV1 - Printed in AustraliaCarcinogenicity / Mutagenicity(can cause cancer)Teratogenicity(can cause birth defects)Target OrgansOH & SEPA Cercla StatusDangerous Goods ClassHazchem CodePoison Schedule NumberFor more information, contact your nearest stockist or phone Fleetguard Customer AssistanceFleetguard Australia31 Garden Street, Kilsyth,Victoria 3137 AustraliaTel: (03) 9721 9100 or 1800 032 037Fax: (03) 9721 9147 or 1800 032 036Email: fleetassist@fleetguard.comFleetguard New ZealandTe: 0800 448 363Fax: 0800 448 367www.fleetguard.comIs Not a Carcinogen or MutagenIs Not TeratogenicNoneNot regulatedNoneNone AllocatedNone AllocatedNone AllocatedYour Fleetguard Stockist:
Change language