SGGPLANITHERM® ONE SGGPLANITHERM® ONE II - Glas Peters

SGGPLANITHERM ® ONESGGPLANITHERM ® ONE IILow-E glassSAINT-GOBAIN GLASS COMFORT

SAINT-GOBAIN GLASS COMFORTLow-E coated glassSGGPLANITHERM ® ONE / ONE IIU-value of 1.0 W/(m 2 .K) finally reached!ApplicationsDescriptionProcessingSGG PLANITHERM ONE, low-E coatedglass, can be used in all insulatingglass units, for new construction orrefurbishment works:- Windows in domestic buildings;- Conservatories;- Windows and façades in nonresidential buildings.It can be incorporated in all types offrames.BenefitsOnce assembled in a double-glazedunit, SGG PLANITHERM ONE offers thebest thermal insulation for a DGU inthe world.• Money savings in all climates.• Great comfort level:- No cold area around windows;- Maximal use of living areas;- Great reduction of condensationlevels on the inner pane.• High light transmission.• Large architectural possibilities(very neutral appearance).• Environmentally friendly thanks tothe CO 2 emission reduction.• Safety function available thanks tothe “to be tempered” versionSGG PLANITHERM ONE II.SGG PLANITHERM ONE is a highperformance low-E coated glass, to beprocessed into an insulating glass unit.It is made of a clear float glass onwhich a thin transparent coating hasbeen deposited by magnetronsputtering under vacuum. The coatingexhibits the lowest emissivity (0.01)industrially accessible; it reflects thefar infrared radiation thus limiting theheat transfer by radiation.ProductrangeMonolithic glass• Standard thickness:from 4mm to 10mm• Substrate:- clear float SGG PLANILUX• Size:- Split sizes and Jumbo size(6000 mm x 3210 mm)• To be tempered version:SGG PLANITHERM ONE II.Once tempered, this glass has thesame thermal performance andappareance as the annealedSGG PLANITHERM ONE.Laminated safety glass• Numerous possibilities of compositions,including one or more PVBinterlayer foils.• Acoustic laminated glass SGG STADIPSILENCE.SGG PLANITHERM ONE should always beprocessed into an insulating glass unit.The coating along theedges is removedthen placed inside thecavity, on face 2 or 3.It can be tempered (inthe case of the posttemperableversion)or laminated prior toits manufacture in1 2 3 4IGU. Please read ourguidance for use of SGG PLANITHERMproducts.PerformancesSGG PLANITHERM ONE, SGG PLANITHERM ONE II, SGG PLANILUX, SGG STADIP SILENCE and all other devices and logos are registered trademarks of Saint-Gobain.low-E coatingSGG PLANITHERM ONE / ONE II complywith the requirements of the class Cof the standard EN 1096 and ismarked(www.saint-gobain-glass.com/ce).PerformancesDGU 4 mm - 16 mm - 4 mm,coating on surface #3Product SGG PLANITHERM SGG PLANITHERMONE ONE II temperedLight factorsLT % 71 71LRe % 22 22LRi % 22 23Solar factor g EN 410 0.49 0.51SC ISO 9050 M1 0.53 0.55U-value W/(m 2 .K)Air filled cavity 1.3 1.3Argon filled cavity 1.0 1.0Average values given according to EN norms,subject to modifications.Van Damme - Beke, Belgium - 09/08 - May be modified without prior notice.Saint-Gobain Glass Deutschland GmbHExport und KundenserviceNikolausstrasse 1D-52222 Stolberg - GermanyTel : + 49 (0) 24 02 - 12 16 71Fax : + 49 (0) 24 02 - 12 16 66www.saint-gobain-glass.comDistributor