QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A9 – Event Log ConfigurationDisplaying the Event LogYou can also filter the event log display with the Show Log Display command andcustomize the messages that display automatically in the output stream.• Filtering the Event Log Display• Controlling Messages in the Output StreamFiltering the Event Log DisplayYou can customize what events are displayed according to the component orseverity level. Enter the Show Log Display command to filter the events in thedisplay. You can choose from the following severity levels and component events:• Informative events• Warning events• Critical events• Port events• Switch management events• Simple Network Management Protocol (SNMP) eventsThe following example filters the event log display for critical events.QLogic8GbT #> show log display criticalControlling Messages in the Output StreamEnter the Set Log Display command to specify the severity level filter to use todetermine what messages are automatically displayed on the screen when theyoccur. Alarms are always included in the output stream. The following exampleincludes warning and critical level messages in the output stream:QLogic8GbT (admin) #> set log display warn59245-01 A 9-3