QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A7 – Connection Security ConfigurationDisplaying SSL and SSH ServicesDisplaying SSL and SSH ServicesEnter the Show Setup Services command to display the status of the SSH andSSL services as shown in the following example:QLogic8GbT #> show setup servicesSystem Services-----------------------------TelnetEnabledTrueSSHEnabledTrueGUIMgmtEnabledTrueSSLEnabledTrueEmbeddedGUIEnabled TrueSNMPEnabledTrueNTPEnabledTrueFTPEnabledTrueCallHomeEnabledTrueCreating an SSL Security CertificateEnabling SSL automatically creates a security certificate on the I/O module. Thesecurity certificate is required to establish an SSL connection with a managementapplication such as QuickTools. The certificate is valid 24 hours before thecertificate creation date and expires 365 days after the creation date. Should theoriginal certificate become invalid, enter the Create Certificate command to createa new one as shown in the following example:QLogic8GbT (admin) #> create certificateThe current date and time is day mon date hh:mm:ss UTC yyyy.This is the time used to stamp onto the certificate.Is the date and time correct? (y/n): [n] yCertificate generation successful.To ensure the creation of a valid certificate, be sure that the I/O module and theworkstation time and date are the same. Refer to “Setting the Date and Time” onpage 5-14.59245-01 A 7-3