QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

6 – Port ConfigurationConfiguring Port Threshold AlarmsSEnter the Set Config Threshold command to enable and configure port thresholdmonitoring on the I/O module:QLogic8GbT #> admin startQLogic8GbT (admin) #> config editQLogic8GbT (admin-config) #> set config thresholdA list of attributes with formatting and current values will follow.Enter a new value or simply press the ENTER key to accept the current value.If you wish to terminate this process before reaching the end of the listpress 'q' or 'Q' and the ENTER key to do so.ThresholdMonitoringEnabled (True / False) [False ]CRCErrorsMonitoringEnabled (True / False) [True ]RisingTrigger (decimal value, 1-1000) [25 ]FallingTrigger (decimal value, 0-1000) [1 ]SampleWindow (decimal value, 1-1000 sec) [10 ]DecodeErrorsMonitoringEnabled (True / False) [True ]RisingTrigger (decimal value, 1-1000) [25 ]FallingTrigger (decimal value, 0-1000) [0 ]SampleWindow (decimal value, 1-1000 sec) [10 ]ISLMonitoringEnabled (True / False) [True ]RisingTrigger (decimal value, 1-1000) [2 ]FallingTrigger (decimal value, 0-1000) [0 ]SampleWindow (decimal value, 1-1000 sec) [10 ]LoginMonitoringEnabled (True / False) [True ]RisingTrigger (decimal value, 1-1000) [5 ]FallingTrigger (decimal value, 0-1000) [1 ]SampleWindow (decimal value, 1-1000 sec) [10 ]LogoutMonitoringEnabled (True / False) [True ]RisingTrigger (decimal value, 1-1000) [5 ]FallingTrigger (decimal value, 0-1000) [1 ]SampleWindow (decimal value, 1-1000 sec) [10 ]LOSMonitoringEnabled (True / False) [True ]RisingTrigger (decimal value, 1-1000) [100 ]FallingTrigger (decimal value, 0-1000) [5 ]SampleWindow (decimal value, 1-1000 sec) [10 ]Finished configuring attributes.This configuration must be saved (see config save command) and activated (seeconfig activate command) before it can take effect.To discard this configuration use the config cancel command.QLogic8GbT (admin-config) #> config saveQLogic8GbT (admin-config) #> config activate6-14 59245-01 A