QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

5 – I/O Module ConfigurationManaging Idle Session TimersSEnter the Set Setup System Timers command to configure idle login and Adminsession limits as shown in the following example:QLogic8GbT (admin) #> set setup system timersA list of attributes with formatting and current values will follow.Enter a new value or simply press the ENTER key to accept the current value.If you wish to terminate this process before reaching the end of the listpress 'q' or 'Q' and the ENTER key to do so.Current Values:AdminTimeout 30InactivityTimeout 0New Value (press ENTER to accept current value, 'q' to quit):AdminTimeout (dec value 0-1440 minutes, 0=never) :InactivityTimeout (dec value 0-1440 minutes, 0=never) :Do you want to save and activate this system setup? (y/n): [n]5-26 59245-01 A