QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A5 – I/O Module ConfigurationManaging Idle Session TimersInstall a Feature License KeyEnter the Feature Add command to install a license key on your I/O module asshown in the following example:QLogic8GbT #> admin startQLogic8GbT (admin) #> feature add 4000-LCOHQSMHTJNF2Full Fabric/Transparent Switch Mode change (All ports licensed in transparent mode)This feature upgrade does NOT require a switch reset.Do you want to continue with license upgrade procedure? (y/n): [n] yLog Msg: [Tue Apr 10 15:42:19.303 EDT 2007][C][8400.005E][Switch][UpgradingLicense for Full Fabric/Transparent Switch Mode change capability]Log Msg: [Tue Apr 10 15:42:19.319 EDT 2007][C][8400.0047][Switch][New licensesare being installed]Managing Idle Session TimersYou can limit the duration of idle login sessions and idle Admin sessions (AdminStart command). You can specify limits up to 1,440 minutes; specifying 0 meansunlimited. Idle login sessions that exceed the limit are logged off(InactivityTimeout). An idle Admin session that exceeds the limit is ended, but thelogin session may be maintained (AdminTimeout). By default, no limit is enforcedon idle login sessions; idle Admin sessions are ended after 30 minutes.Enter the Show Setup System Timers command to display the idle login andAdmin session configuration as shown in the following example:QLogic8GbT #> show setup system timersSystem Information------------------AdminTimeout 30InactivityTimeout 059245-01 A 5-25