QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A5 – I/O Module ConfigurationInstalling Firmware4. When prompted to install the new firmware, enter Yes to continue or No tocancel. Entering Yes will disrupt traffic. This is the last opportunity to cancel.About to install image. Do you want to continue? [y/n] yConnected to 10.20.20.200 (10.20.20.200).220 localhost.localdomain FTP server (Version wu-2.6.1-18)ready.5. Enter the password for your account name (FTP only).331 Password required for johndoe.Password:******230 User johndoe logged in.6. The firmware will now be downloaded from the remote host to the I/Omodule, installed, and activated.Custom Firmware InstallationA custom firmware installation downloads the firmware image file from a remotehost to the I/O module, unpacks the image file, and resets the I/O module inseparate steps. This allows you to choose the type of reset and whether theactivation will be disruptive (Reset Switch command) or nondisruptive (Hotresetcommand). The following example illustrates a custom firmware installation with anondisruptive activation.1. Download the firmware image file from the workstation to the I/O module.• If your workstation has an FTP server, you can enter the Image Fetchcommand:QLogic8GbT #> admin startQLogic8GbT (admin) #> image fetch account_name ip_addressfilename• If your workstation has a TFTP server, you can enter the Image TFTPcommand to download the firmware image file.QLogic8GbT (admin) #> image tftp ip_address filename59245-01 A 5-19