QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A5 – I/O Module ConfigurationManaging I/O Module ConfigurationsManaging I/O Module ConfigurationsThe I/O module configuration determines the basic operational characteristics ofthe I/O module. An I/O module supports up to 10 configurations including thedefault configuration, named Default Config. The current I/O module operatingcharacteristics are determined by the active configuration. Only one configurationcan be active at one time.Each I/O module configuration contains I/O module, port, port threshold alarm,and zoning configuration components. Managing I/O Module Configurationsdescribes the following tasks:• Display a List of I/O Module Configurations• Activate an I/O Module Configuration• Copy an I/O Module Configuration• Delete an I/O Module Configuration• Modify an I/O Module Configuration• Back Up and Restore an I/O Module ConfigurationDisplay a List of I/O Module ConfigurationsEnter the Config List command to display the configurations stored on the I/Omodule as show in the following example. Notice that the Config List commanddoes not require an Admin session.QLogic8GbT #> config listCurrent list of configurations------------------------------defaultconfig_1config_2Activate an I/O Module ConfigurationEnter the Config Activate command to activate an I/O module configuration(config_1) as shown in the following example:QLogic8GbT (admin) config activate config_1Copy an I/O Module ConfigurationEnter the Config Copy command to create a copy of an existing configuration asshown in the following example:QLogic8GbT (admin) config copy config_1 config_259245-01 A 5-9