QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A5 – I/O Module ConfigurationDisplaying I/O Module InformationHardware InformationEnter the Show Chassis command to display the status of the I/O modulehardware including power supplies, internal temperature, and Heartbeat LEDstatus.The following is an example of the Show Chassis command:QLogic8GbT #> show chassisChassis Information-------------------BoardTemp (1) - Degrees Celsius 36PowerSupplyStatus (1)GoodHeartBeatCode 1HeartBeatStatusNormalThe HeartBeatCode and HeartBeatStatus entries indicate the Power-on Self Test(POST) results revealed by the Heartbeat LED blink patterns. The result is normaloperation or a blink pattern indicating a critical error as described in Table 5-1.Refer to your QLogic 8 Gb Intelligent Pass-thru Module and 20-Port 8 Gb SANSwitch Modules: Installation Guide for more information about the Heartbeat LEDand its blink patterns.Table 5-1. Heartbeat LED ActivityHeartBeatCode–HeartBeatStatus1–Normal2–AppDied3–PostFailed4–CorruptFilesystem5–OverheatingDescriptionOne blink per second–Normal operationTwo blink cluster–Internal firmware failureThree blink cluster–Fatal POST errorFour blink cluster–Configuration file system errorFive blink cluster– Over temperature59245-01 A 5-5