QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

5 – I/O Module ConfigurationDisplaying I/O Module InformationSElapsed Time Between ResetsThe Uptime command displays the elapsed time since the I/O module was lastreset and the reset method. A hot reset or non-disruptive firmware activation doesnot reset the elapsed time reported by this command. The following exampledisplays the time since the last reset.QLogic8GbT #> uptimeElapsed up time : 0 day(s), 2 hour(s), 28 min(s), 44 sec(s)Reason last reset: NormalResetConfiguration InformationEnter the Show Config Switch command to display the I/O module configurationparameters. These parameters determine the operational characteristics of theI/O module. Refer to Table 12-14 for a description these parameters.QLogic8GbT #> show config switchConfiguration Name: default-------------------Switch Configuration Information--------------------------------TransparentMode TrueAdminStateOnlineSymbolicNameQLogic8GbTR_A_TOV 10000E_D_TOV 2000ConfigDescription Default ConfigConfigLastSavedBy admin@OB-session5ConfigLastSavedOn day month date time year5-4 59245-01 A