QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A4 – Network and Fabric ConfigurationManaging IP SecurityRenaming a User-Defined AssociationTo rename a user-defined association (association_1), enter theIpsec Association Rename command as shown in the following example:QLogic8GbT #> admin startQLogic8GbT (admin) #> ipsec editQLogic8GbT (admin-ipsec) #> ipsec association rename association_1 association_4The security association will be renamed. Please confirm (y/n): [n] yQLogic8GbT (admin-ipsec) #> ipsec saveThe IPsec configuration will be saved and activated.Please confirm (y/n): [n] yCopying an AssociationYou can copy both user-defined and dynamic associations. To copy anassociation (association_1), enter the Ipsec Association Copy command asshown in the following example:QLogic8GbT #> admin startQLogic8GbT (admin) #> ipsec editQLogic8GbT (admin-ipsec) #> ipsec association copy association_1 association_aQLogic8GbT (admin-ipsec) #> ipsec saveThe IPsec configuration will be saved and activated.Please confirm (y/n): [n] yResetting the IP Security ConfigurationResetting the IP Security configuration deletes all policies and associations fromthe switch. There are two ways to do this. Within an Ipsec Edit session, enter theIpsec Clear command, then save the changes as shown in the following example:QLogic8GbT #> admin startQLogic8GbT (admin) #> ipsec editQLogic8GbT (admin-ipsec) #> ipsec clearQLogic8GbT (admin-ipsec) #> ipsec saveThe IPsec configuration will be saved and activated.Please confirm (y/n): [n] y59245-01 A 4-17