QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

4 – Network and Fabric ConfigurationManaging IP SecuritySIf you wish to terminate this process before reaching the end of the listpress 'q' or 'Q' and the ENTER key to do so.Current Values:DescriptionHost-to-host: switch->host..EncryptionKey 123456789012345678901234New Value (press ENTER to not specify value, 'q' to quit, 'n' for none):Description (string value, 0-127 bytes) :*SourceAddress (IPv4, IPv6 or hostname) :*DestinationAddress (IPv4, IPv6 or hostname) :*Protocol(1=esp, 2=esp-old, 3=ah, 4=ah-old) : ah*SPI (decimal value, 256-4294967295) :Authentication (select an authentication algorithm)1=hmac-md5 (16 byte key)2=hmac-sha1 (20 byte key)3=hmac-sha256 (32 byte key)4=aes-xcbc-mac (16 byte key)authentication algorithm choice :*AuthenticationKey (quotes string or raw hex bytes) :*Encryption(select an encryption algorithm)1=des-cbc (8 byte key)2=3des-cbc (24 byte key)3=null (0 byte key)4=blowfish-cbc (5-56 byte key)5=aes-cbc (16/24/32 byte key)6=twofish-cbc (32 byte key)encryption algorithm choice :*EncryptionKey (quoted string or raw hex bytes) :The security association has been edited.This configuration must be saved with the 'ipsec save' commandbefore it can take effect, or to discard this configurationuse the 'ipsec cancel' command.QLogic8GbT (admin-ipsec) #> ipsec saveThe IPsec configuration will be saved and activated.Please confirm (y/n): [n] y4-16 59245-01 A