QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A4 – Network and Fabric ConfigurationManaging IP SecurityDeleting an AssociationTo delete a user-defined association, enter the Ipsec Association Deletecommand as shown in the following example:QLogic8GbT #> admin startQLogic8GbT (admin) #> ipsec editQLogic8GbT (admin-ipsec) #> ipsec association delete association_1The security association will be deleted. Please confirm (y/n): [n] yQLogic8GbT (admin-ipsec) #> ipsec saveThe IPsec configuration will be saved and activated.Please confirm (y/n): [n] yModifying a User-Defined AssociationTo modify an existing user-defined association, enter the Ipsec Association Editcommand in an Admin session and an Ipsec Edit session as shown in thefollowing example. An asterisk (*) indicates a required entry.QLogic8GbT (admin-ipsec) #> ipsec association edit h2h-sh-saA list of attributes with formatting and current values will follow.Enter a new value or simply press the ENTER key to accept the current value.To remove a value for an optional attribute, use ’n’.59245-01 A 4-15