QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

4 – Network and Fabric ConfigurationManaging IP SecuritySCreating an AssociationTo create an association, enter the Ipsec Association Create command as shownin the following example:QLogic8GbT #> admin startQLogic8GbT (admin) #> ipsec editQLogic8GbT (admin-ipsec) #> ipsec association create h2h-sh-saA list of attributes with formatting will follow.Enter a value or simply press the ENTER key to skip specifying a value.If you wish to terminate this process before reaching the end of the listpress 'q' or 'Q' and the ENTER key to do so.Required attributes are preceded by an asterisk.Value (press ENTER to not specify value, 'q' to quit):Description (string value, 0-127 bytes) : Host-to-host: switch->host*SourceAddress (hostname, IPv4, or IPv6 Address) : fe80::2c0:ddff:fe03:d4c1*DestinationAddress (hostname, IPv4, or IPv6 Address) : fe80::250:daff:feb7:9d02*Protocol (1=esp, 2=esp-old, 3=ah, 4=ah-old) : 1*SPI (decimal value, 256-4294967295) : 333Authentication (select an authentication algorithm)1=hmac-md5 (16 byte key)2=hmac-sha1 (20 byte key)3=hmac-sha256 (32 byte key)4=aes-xcbc-mac (16 byte key)authentication algorithm choice : 2*AuthenticationKey (quoted string or raw hex bytes) : "12345678901234567890"*Encryption(select an encryption algorithm)1=des-cbc (8 byte key)2=3des-cbc (24 byte key)3=null(0 byte key)4=blowfish-cbc (5-56 byte key)5=aes-cbc (16/24/32 byte key)6=twofish-cbc (16-32 byte key)encryption algorithm choice : 2*EncryptionKey (quoted string or raw hex bytes) : "123456789012345678901234"The security association has been created.This configuration must be saved with the 'ipsec save' commandbefore it can take effect, or to discard this configurationuse the 'ipsec cancel' command.4-14 59245-01 A