QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A4 – Network and Fabric ConfigurationManaging IP SecurityRenaming a User-Defined PolicyTo rename a policy (policy_1), enter the Ipsec Policy Rename command as shownin the following example:QLogic8GbT #> admin startQLogic8GbT (admin) #> ipsec editQLogic8GbT (admin-ipsec) #> ipsec policy rename policy_1 policy_4The security policy will be renamed. Please confirm (y/n): [n] yQLogic8GbT (admin-ipsec) #> ipsec saveThe IPsec configuration will be saved and activated.Please confirm (y/n): [n] yCopying a PolicyYou can copy both user-defined and dynamic policies. To copy a policy (policy_1),enter the Ipsec Policy Copy command as shown in the following example:QLogic8GbT #> admin startQLogic8GbT (admin) #> ipsec editQLogic8GbT (admin-ipsec) #> ipsec policy copy policy_1 policy_aQLogic8GbT (admin-ipsec) #> ipsec saveThe IPsec configuration will be saved and activated.Please confirm (y/n): [n] yManaging the Security Association DatabaseThe security association database is made up of user-defined associations anddynamic associations (associations created by the switch). In addition to creatingan association, you can delete, modify, rename, and copy user-definedassociations. Dynamic associations can only be copied.• Creating an Association• Deleting an Association• Modifying a User-Defined Association• Renaming a User-Defined Association• Copying an Association59245-01 A 4-13