QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A4 – Network and Fabric ConfigurationManaging IP SecurityManaging IP SecurityTo modify IP Security, you must open an Admin session with the Admin Startcommand. An Admin session prevents other accounts from making changes atthe same time through Telnet, QuickTools, Enterprise Fabric Suite 2007, oranother management application. You must also open an Ipsec Edit session withthe Ipsec Edit command. The Ipsec Edit session provides access to the Ipsec,Ipsec Association and Ipsec Policy commands with which you make modificationsto the IP Security configuration.QLogic8GbT #> admin startQLogic8GbT (admin) #> ipsec editQLogic8GbT (admin-ipsec)#> ipsec . . .QLogic8GbT (admin-ipsec)#> ipsec policy . . .QLogic8GbT (admin-ipsec)#> ipsec association. . .When you are finished making changes, enter the Ipsec Save command to saveand activate the changes and close the Ipsec Edit session. Changes take effectimmediately.QLogic8GbT (admin-ipsec)#> ipsec saveTo close the Ipsec Edit session without saving changes, enter the Ipsec Cancelcommand.QLogic8GbT (admin-ipsec)#> ipsec cancelThe Admin End command releases the Admin session for other administratorswhen you are done making changes to the I/O module.To remove all IP security policies and associations, enter the Reset Ipseccommand.QLogic8GbT (admin) #> reset ipsecThe following subsections present IP security concepts and management tasks:• IP Security Concepts• Displaying IP Security Information• Managing the Security Policy Database• Managing the Security Association Database• Resetting the IP Security Configuration59245-01 A 4-5