QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceTest PortExamples The following is an example of an internal test on port 1.QLogic8GbT #> admin startQLogic8GbT (admin) #> set port 1 state diagnosticsQLogic8GbT (admin) #> test port 1 offline internalA list of attributes with formatting and current values will follow. Enter a newvalue or simply press the ENTER key to accept the default value. If you wish toterminate this process before reaching the end of the list press 'q' or 'Q' andthe ENTER key to do so.LoopCount (decimal value, 1-4294967295) [100 ]FrameSize (decimal value, 40-2148) [256 ]DataPattern (32-bit hex value or 'Default') [Default ]StopOnError (True / False) [True ]LoopForever (True / False) [False ]Do you want to start the test? (y/n) [n] yThe test has been started.A notification with the test result(s) will appearon the screen when the test has completed.QLogic8GbT (admin) #>Test for port 1 Passed.When the test is complete, remember to place the port back online.QLogic8GbT (admin) #> set port 1 state online59245-01 A 12-161