QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A4 – Network and Fabric ConfigurationDNS Server ConfigurationDNS Server ConfigurationA DNS server manages the host names for a fabric. This enables you to specifyservers and switches by a meaningful name rather than IP address. To configurea DNS server, enter the Set Setup System Dns command in an Admin session asshown in the following example:QLogic8GbT (admin) #> set setup system dnsA list of attributes with formatting and current values will follow.Enter a new value or simply press the ENTER key to accept the current value.If you wish to terminate this process before reaching the end of the listpress 'q' or 'Q' and the ENTER key to do so.Current Values:DNSClientEnabled FalseDNSLocalHostname DNSServerDiscovery StaticDNSServer1Address DNSServer2Address DNSServer3Address DNSSearchListDiscovery StaticDNSSearchList1DNSSearchList2DNSSearchList3DNSSearchList4DNSSearchList5New Value (press ENTER to accept current value, 'q' to quit, 'n' for none):DNSClientEnabled (True / False) :DNSLocalHostname (hostname) :DNSServerDiscovery (1=Static, 2=Dhcp, 3=Dhcpv6) :DNSServer1Address (IPv4, or IPv6 Address) :DNSServer2Address (IPv4, or IPv6 Address) :DNSServer3Address (IPv4, or IPv6 Address) :DNSSearchListDiscovery (1=Static, 2=Dhcp, 3=Dhcpv6) :DNSSearchList1 (domain name) :DNSSearchList2 (domain name) :DNSSearchList3 (domain name) :DNSSearchList4 (domain name) :DNSSearchList5 (domain name) :Do you want to save and activate this system setup? (y/n): [n]59245-01 A 4-3