QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceSnmpv3userlistDisplays SNMP version 3 user accounts, group, authentication type, and privacytype. This keyword does not require an Admin session.ExamplesThe following is an example of the Snmpv3user Add command:QLogic8GbT #> admin startQLogic8GbT (admin) #> snmpv3user addA list of SNMPV3 user attributes with formatting and default values asapplicable will follow.Enter a new value OR simply press the ENTER key where-ever allowed toaccept the default value.If you wish to terminate this process before reaching the end of the list,press "q" or "Q" and the ENTER OR "Ctrl-C" key to do so.Username (8-32 chars) : snmpuser1Group (0=ReadOnly, 1=ReadWrite) [ReadOnly ] : 1Authentication (True/False) [False ] : tAuthType (1=MD5, 2=SHA) [MD5 ] : 1AuthPhrase (8-32 chars) : ***********Confirm AuthPhrase : ***********Privacy (True/False) [False ] : tPrivType (1=DES) [DES ] : 1PrivPhrase (8-32 chars) : ********Confirm PrivPhrase : ********Do you want to save and activate this snmpv3user setup ?(y/n): [n] ySNMPV3 user added and activated.The following is an example of the Snmpv3user Delete command:QLogic8GbT #> admin startQLogic8GbT (admin) #> snmpv3user delete snmpuser1The user account will be deleted. Please confirm (y/n): [n] ySNMPV3 user deleted.59245-01 A 12-157