QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceShow SwitchShow SwitchDisplays I/O module operational information.AuthoritySyntaxNotesNoneshow switchTable 12-30 describes the I/O module operational parameters.Table 12-30. I/O Module Operational ParametersParameterSymbolicNameSwitchWWNBootVersionCreditPoolDescriptionDescriptive name for the I/O moduleI/O module world wide namePROM boot versionNumber of port buffer credits available to recipientportsFirstPortAddress FC address of I/O module port 0FlashSize - MBytesLogFilterLevelMaxPortsNumberOfResetsReasonForLastResetActiveImageVersion - build datePendingImageVersion - build dateActiveConfigurationAdminStateAdminModeActiveBeaconOnStatusOperationalStateSize of the flash memory in megabytesEvent severity level used to record events in theevent logNumber of ports available on the I/O moduleNumber of times the I/O module has been resetover its service lifeAction that caused the last resetActive firmware image version and build date.Firmware image version and build date that ispending. This image will become active at the nextreset or power cycle.Name of the I/O module configuration that is inuse.I/O module administrative stateAdmin session statusBeacon status as set by the Set Beacon command.I/O module operational state59245-01 A 12-147