QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceShow Setup SNMPShow Setup SNMPDisplays the current SNMP settings.AuthoritySyntaxKeywordsNoneshow setup snmpcommontrapcommonDisplays SNMP configuration parameters that are common to all traps. To displaycommon and trap-specific parameters, omit the keyword. Refer to Table 12-20 fordescriptions of the common configuration parameters.trapDisplays trap-specific SNMP configuration parameters. To display common andtrap-specific parameters, omit the keyword. Refer to Table 12-21 for descriptionsof the trap-specific configuration parameters.The following is an example of the Show Setup Snmp Common command:QLogic8GbT #> show setup snmp commonSNMP Information----------------SNMPEnabledTrueContactLocationDescriptionQLogic 8 Gb FC SwitchObjectID 1.3.6.1.4.1.3873.1.12AuthFailureTrap TrueProxyEnabledTrueSNMPv3EnabledFalseThe following is an example of the Show Setup Snmp Trap command:QLogic8GbT #> show setup snmp trap 1SNMP Information----------------Trap1Address 10.0.0.254Trap1Port 162Trap1SeveritywarningTrap1Version 2Trap1EnabledFalse59245-01 A 12-143