QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceShow PortTable 12-29. Show Port Parameters (Continued)EntryLIP_F8_AL_PSLIP_F7_F7LIP_F8_F7LoginLoginStatusLogoutLongFramesInLoopTimeoutsLossOfSyncLostFramesLost RRDYsMaxCreditMediaSpeedsMediaPartNumberMediaRevisionMediaTypeMediaVendorMediaVendorIDOperationalStatePerfTuningModePortIDThis LIP denotes a loop failure detected by the L_Port identifiedby AL_PS.A loop initialization primitive frame used to acquire a validAL_PA.A loop initialization primitive frame used to indicate that a loopfailure has been detected at the receiver.Number of device loginsLogin statusNumber of device logoutsNumber of incidents when one or more frames are receivedthat are greater than the maximum size.A two (2) second timeout as specified by FC-AL-2.Number of synchronization losses (>100 ms) detected by thisport. A loss of synchronization is detected by receipt of aninvalid transmission word.Number of incidents of lost frames.Number of incidents of lost R_RDYs.Maximum number of port buffer creditsPossible transmission speedsTransceiver vendor part numberTransceiver revisionMedia physical variant. The variant indicates speed, media,transmitter, and distance. The media designator may be M5(multimode 50 micron), M6 (multimode 62.5 micron), or MX.MX indicates that the media supports both multimode 50 and62.5 micron.Transceiver manufacturerTransceiver manufacturer identifierOperational stateAutoPerfTuning statusFibre Channel port addressDescription59245-01 A 12-133