QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceShow MediaShow MediaDisplays transceiver operational and diagnostic information for one or moreexternal ports.NOTE:This command requires the SANdoctor license key. To purchase a licensekey, contact your authorized maintenance provider or authorized reseller.Use the Feature command to install a license key.AuthoritySyntaxKeywordsNoneshow media[port_list]allinstalled[port_list]The external port or ports for which to display transceiver information. [port_list]can be a set of port numbers and ranges delimited by spaces. For example,[0 15-19] specifies ports 0, 15, 16, 17, 18, and 19.allDisplays transceiver information for all ports.installedDisplays transceiver information for all ports that have transceivers installed.NotesTable 12-28 describes the transceiver information in the Show Media display.Table 12-28. Transceiver InformationInformation TypeMediaTypeDescriptionMedia physical variant. The variant indicates speed, media,transmitter, and distance. The media designator may be M5(multimode 50 micron), M6 (multimode 62.5 micron), or MX.MX indicates that the media supports both multimode 50 and62.5 micron.MediaType may also be on of the following:• NotInstalled–transceiver is not installed.• Unknown–transceiver does not have a serial ID.• NotApplicable–transceiver is not needed.59245-01 A 12-121