QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceShow LogWarningDisplays all warning events.CriticalDisplays all critical events.Port [port_number]Displays all events related to the port given by [port_number].SNMPDisplays all events related to SNMP.SwitchDisplays all events related to I/O module management.levelDisplays the event severity level logging setting and the display level setting.optionsDisplays the options that are available for configuring event logging and automaticdisplay to the screen. Refer to the “Set Log” command on page 12-73 forinformation about how to configure event logging and display level.portDisplays the ports being monitored for events. If an event occurs which is of thedefined level and on a defined component, but not on a defined port, no entry ismade in the log.settingsDisplays the current filter settings for component, severity level, port, and displaylevel. This command is equivalent to executing the following commandsseparately: Show Log Component, Show Log Level, and Show Log Port.ExamplesThe following is an example of the Show Log Component command:QLogic8GbT #> show log componentCurrent settings for log------------------------FilterComponent Switch Port Snmp CLI59245-01 A 12-119