QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

12 – Command ReferenceSet Switch StateSSet Switch StateChanges the administrative state for all ports on the I/O module. The previous SetConfig Switch settings are restored after an I/O module reset or a reactivation ofan I/O module configuration.AuthoritySyntaxKeywordsAdmin sessionset switch state [state][state][state] can be one of the following:onlineActivates and prepares the ports to send data. This is the default.offlinePrevents the ports from receiving signal and accepting a device login.diagnosticsPrepares the ports for testing and prevents each port from accepting adevice login. When you leave the diagnostics state, the I/O moduleautomatically resets.ExamplesThe following is an example of the Set Switch command:QLogic8GbT #>admin startQLogic8GbT (admin) #>set switch state offline12-104 59245-01 A