QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

12 – Command ReferenceSet Setup SystemSThe following is an example of the Set Setup System command:QLogic8GbT (admin) #> set setup systemA list of attributes with formatting and current values will follow.Enter a new value or simply press the ENTER key to accept the current value.If you wish to terminate the configuration process completely, press 'qq' or'QQ' and the ENTER key to do so.DNS Network Configuration - may optionally use 'set setup system dns' command.Current Values:DNSClientEnabled FalseDNSLocalHostname DNSServerDiscovery StaticDNSServer1Address DNSServer2Address DNSServer3Address DNSSearchListDiscovery StaticDNSSearchList1DNSSearchList2DNSSearchList3DNSSearchList4DNSSearchList5New Value (press ENTER to accept current value, 'q' to quit, 'n' for none):DNSClientEnabled (True / False) :DNSLocalHostname (hostname) :DNSServerDiscovery (1=Static, 2=Dhcp, 3=Dhcpv6) :DNSServer1Address (IPv4, or IPv6 Address) :DNSServer2Address (IPv4, or IPv6 Address) :DNSServer3Address (IPv4, or IPv6 Address) :DNSSearchListDiscovery (1=Static, 2=Dhcp, 3=Dhcpv6) :DNSSearchList1 (domain name) :DNSSearchList2 (domain name) :DNSSearchList3 (domain name) :DNSSearchList4 (domain name) :DNSSearchList5 (domain name) :NTP Network Configuration - may optionally use 'set setup system ntp' command.Current Values:NTPClientEnabled FalseNTPServerDiscovery StaticNTPServerAddress 10.0.0.254New Value (press ENTER to accept current value, 'q' to quit, 'n' for none):12-102 59245-01 A