QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceSet Setup SystemThe following is an example of the Set Setup System Timers command:QLogic8GbT (admin) #> set setup system timersA list of attributes with formatting and current values will follow.Enter a new value or simply press the ENTER key to accept the current value.If you wish to terminate this process before reaching the end of the listpress 'q' or 'Q' and the ENTER key to do so.Current Values:AdminTimeout 30InactivityTimeout 0New Value (press ENTER to accept current value, 'q' to quit):AdminTimeout (dec value 0-1440 minutes, 0=never) :InactivityTimeout (dec value 0-1440 minutes, 0=never) :Do you want to save and activate this system setup? (y/n): [n]59245-01 A 12-101