QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceSet Setup SNMPThe following is an example of the Set Setup SNMP Trap command:QLogic8GbT (admin) #> set setup snmp trap 1A list of attributes with formatting and current values will follow.Enter a new value or simply press the ENTER key to accept the current value.If you wish to terminate this process before reaching the end of the listpress 'q' or 'Q' and the ENTER key to do so.Current Values:Trap1Enabled TrueTrap1Address 10.20.33.181Trap1Port 5001Trap1Severity infoTrap1Version 2Trap1Community northdakotaNew Value (press ENTER to not specify value, 'q' to quit):Trap1Enabled (True / False) :Trap1Address (hostname, IPv4, or IPv6 Address?) :Trap1Port (decimal value, 1-65535) :Trap1Severity (select a severity level)1=unknown 6=warning2=emergency 7=notify3=alert 8=info4=critical 9=debug5=error 10=mark :Trap1Version (1 / 2) :Trap1Community (string, max=32 chars) :Do you want to save and activate this snmp setup? (y/n): [n]59245-01 A 12-95