QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

12 – Command ReferenceSet Setup SNMPSExamplesThe following is an example of the Set Setup SNMP Common command:QLogic8GbT (admin) #> set setup snmp commonA list of attributes with formatting and current values will follow.Enter a new value or simply press the ENTER key to accept the current value.If you wish to terminate this process before reaching the end of the listpress 'q' or 'Q' and the ENTER key to do so.Current Values:SnmpEnabled TrueContactLocationReadCommunity publicWriteCommunity privateAuthFailureTrap FalseProxyEnabled TrueSNMPv3Enabled FalseNew Value (press ENTER to not specify value, 'q' to quit):SnmpEnabled (True / False) :Contact (string, max=64 chars) :Location (string, max=64 chars) :ReadCommunity (string, max=32 chars) :WriteCommunity (string, max=32 chars) :AuthFailureTrap (True / False) :ProxyEnabled (True / False) :SNMPv3Enabled (True / False) :Do you want to save and activate this snmp setup? (y/n): [n]12-94 59245-01 A