QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceSet Setup ServicesSet Setup ServicesConfigures services on the I/O module.AuthoritySyntaxAdmin sessionset setup servicesPrompts you in a line-by-line fashion to enable or disable I/O module services.Table 12-19 describes the I/O module service parameters. For each parameter,enter a new value or press the Enter key to accept the current value shown inbrackets.NOTE:Use caution when disabling TelnetEnabled and GUIMgmtEnabled; it ispossible to disable all Ethernet access to the I/O module.Table 12-19. I/O Module Services SettingsEntryTelnetEnabledSSHEnabledGUIMgmtEnabledDescriptionEnables (True) or disables (False) the ability to managethe I/O module over a Telnet connection. Disabling this serviceis not recommended. The default is True.Enables (True) or disables (False) Secure Shell (SSH)connections to the I/O module. SSH secures the remoteconnection to the I/O module. To establish a secure remoteconnection, your workstation must use an SSH client. Thedefault is False.Enables (True) or disables (False) out-of-band managementof the I/O module with Enterprise Fabric Suite 2007,the Application Programming Interface, SNMP, and SMI-S.The default is True.59245-01 A 12-89