QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

12 – Command ReferenceSet Setup RadiusSThe following is an example of the Set Setup Radius Server command:QLogic8GbT (admin) #> set setup radius server 1A list of attributes with formatting and current values will follow.Enter a new value or simply press the ENTER key to accept the current value.If you wish to terminate this process before reaching the end of the attributesfor the server being processed, press 'q' or 'Q' and the ENTER key to do so.If you wish to terminate the configuration process completely, press 'qq' or'QQ' and the ENTER key to so do.PLEASE NOTE:-----------* SSL must be enabled in order to configure RADIUS User AuthenticationSSL can be enabled using the 'set setup services' command.Server 1 Current Values:ServerIPAddress 10.20.11.8ServerUDPPort 1812DeviceAuthServer TrueUserAuthServer TrueAccountingServer FalseTimeout 10Retries 0SignPackets FalseSecret **********New Server 1 Value (press ENTER to accept current value, 'q' to skip):ServerIPAddress (hostname, IPv4, or IPv6 address) :ServerUDPPort (decimal value) :DeviceAuthServer (True / False) :UserAuthServer (True / False) :AccountingServer (True / False) :Timeout (decimal value, 10-30 secs) :Retries (decimal value, 1-3, 0=None) :SignPackets (True / False) :Secret (1-63 characters, recommend 22+) :Do you want to save and activate this radius setup? (y/n): [n]12-88 59245-01 A