QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceSet Setup RadiusExamplesThe following is an example of the Set Setup RADIUS Common command:QLogic8GbT (admin) #> set setup radius commonA list of attributes with formatting and current values will follow.Enter a new value or simply press the ENTER key to accept the current value.If you wish to terminate this process before reaching the end of the attributesfor the server being processed, press 'q' or 'Q' and the ENTER key to do so.If you wish to terminate the configuration process completely, press 'qq' or'QQ' and the ENTER key to so do.PLEASE NOTE:-----------* SSL must be enabled in order to configure RADIUS User AuthenticationSSL can be enabled using the 'set setup services' command.Current Values:DeviceAuthOrder LocalUserAuthOrder LocalTotalServers 1New Value (press ENTER to not specify value, 'q' to quit):DeviceAuthOrder 1=Local, 2=Radius, 3=RadiusLocal :UserAuthOrder 1=Local, 2=Radius, 3=RadiusLocal :TotalServers decimal value, 0-5 :Do you want to save and activate this radius setup? (y/n): [n]59245-01 A 12-87