QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceSet Setup CallhomeExamplesThe following is an example of the Set Setup Callhome command:QLogic8GbT (admin) #> set setup callhomeA list of attributes with formatting and current values will follow. Enter a newvalue or simply press the ENTER key to accept the current value. If you wish toterminate this process before reaching the end of the list press 'q' or 'Q' and theENTER key to do so.If either the Primary or Secondary SMTP Servers are enabled, the FromEmailAddressattribute must be configured or the switch will not attempt to deliver messages.Current Values:PrimarySMTPServerAddr 0.0.0.0PrimarySMTPServerPort 25PrimarySMTPServerEnable FalseSecondarySMTPServerAddr 0.0.0.0SecondarySMTPServerPort 25SecondarySMTPServerEnable FalseContactEmailAddress nobody@localhost.localdomainPhoneNumberStreetAddressFromEmailAddressnobody@localhost.localdomainReplyToEmailAddress nobody@localhost.localdomainThrottleDupsEnabled TrueNew Value (press ENTER to accept current value, 'q' to quit):PrimarySMTPServerAddr (IPv4, IPv6, or hostname) :PrimarySMTPServerPort (decimal value) :PrimarySMTPServerEnable (True / False) :SecondarySMTPServerAddr (IPv4, IPv6, or hostname) :SecondarySMTPServerPort (decimal value) :SecondarySMTPServerEanble (True / False) :ContactEmailAddress (ex: admin@company.com) :PhoneNumber (ex: +1-800-123-4567) :StreetAddress (include all address info) :FromEmailAddress (ex: bldg3@company.com) :ReplyToEmailAddress (ex: admin3@company.com) :ThrottleDupsEnabled (True / False) :Do you want to save and activate this Callhome setup? (y/n):59245-01 A 12-83