QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

12 – Command ReferenceSet Setup CallhomeSTable 12-16. Call Home Service Configuration Settings (Continued)EntryFromEmailAddressReplyToEmailAddressThrottleDupsEnabledDescriptionE-mail address that is defined as the sendingaddress in the From: field of the e-mail message.The format is account@domain. This field isrequired. Undeliverable messages are returned tothis address unless overridden by theReplayToEmailAddress parameter.E-mail address that is to receive replies to the outbounde-mail message. The format isaccount@domain. This parameter overrides theFromEmailAddress parameter.Enables (True) or disables (False) the throttling ofduplicate e-mail messages in the message queue.When enabled, duplicate e-mail messages thatenter the queue within 15 seconds of the originalare suppressed. The original message is sent witha report of the number of suppressed duplicates.Notes • The Call Home service must be active to support Call Home e-mailnotification. Refer to the “” command on page 12-88.• The primary, secondary, or both SMTP servers must be properly addressedand enabled on the switch to activate Call Home e-mail notification. If bothSMTP servers are enabled, the primary server is active.• The switch will reroute Call Home e-mail messages to the secondary SMTPserver if the primary should become unavailable. Primary and secondaryidentities do not change upon transfer of control.• Call Home profiles determine the events, conditions, and e-mail recipients ofCall Home e-mail messages. Refer to the “Profile” command on page 12-49for information about creating Call Home profiles.12-82 59245-01 A