QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceSet Setup CallhomeSet Setup CallhomeConfigures the Call Home database for managing e-mail notifications of fabricproblems.AuthoritySyntaxAdmin sessionset setup callhomePrompts you in a line-by-line fashion to configure the Call Home database.Table 12-17 describes the Call Home configuration fields.Table 12-16. Call Home Service Configuration SettingsEntryPrimarySMTPServerAddrPrimarySMTPServerPortPrimarySMTPServerEnabledSecondarySMTPServerAddrSecondarySMTPServerPortSecondarySMTPServerEnabledContactEmailAddressPhoneNumberStreetAddressDescriptionIP address or DNS host name of the primarySMTP server. The default is 0.0.0.0.Service port number that the primary SMTPserver is monitoring for SMTP agents. The defaultis 25.Enables (True) or disables (False) the primarySMTP server. The default is False.IP address or DNS host name of the secondarySMTP server. The default is 0.0.0.0.Service port number that the secondary SMTPserver is monitoring for SMTP agents. The defaultis 25.Enable (True) or disable (False) the secondarySMTP server. The default is False.E-mail address of the person to be notified torespond to the e-mail message. The format isaccount@domain. This information is included inthe e-mail message when the profile format isFullText.Contact phone number to be included in thee-mail message text. This information is includedin the e-mail message when the profile format isFullText.Contact street address to be included in the e-mailmessage text. This information is included in thee-mail message when the profile format is Full-Text.59245-01 A 12-81