QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

12 – Command ReferenceSet PortSspeed [transmission_speed]Specifies the transmission speed for the specified port. Choose one of thefollowing port speed values:1Gb/sOne gigabit per second.2Gb/sTwo gigabits per second.4Gb/sFour gigabits per second.8Gb/sEight gigabits per second.AutoThe port speed is automatically detected.state [state]Specifies one of the following administrative states for the specified port:OnlineActivates and prepares the port to send data.OfflinePrevents the port from receiving signal and accepting a device login.DiagnosticsPrepares the port for testing and prevents the port from accepting a devicelogin.DownDisables the port by removing power from the port lasers.ExamplesThe following is an example of the Set Port State command:QLogic8GbT: user1> admin startQLogic8GbT (admin): user1> set port state down12-80 59245-01 A