QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A2 – Command Line Interface UsageDownloading and Uploading FilesTo upload a file from the workstation to the I/O module, do the following1. Enter the FTP command and the I/O module IP address or symbolic name.>ftp 192.168.70.1292. When prompted for a user and password, enter the FTP account name andpassword (images, images).user:imagespassword: images3. Set binary mode and use the Put command to upload the file(config_switch_169).ftp>put config_switch_169 configdataxxxxx bytes sent in xx secs.ftp>quit59245-01 A 2-9