QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

A12 – Command ReferenceSet LogInfoMonitors informative, warning, and critical events. The informative leveldescribes routine events associated with a normal fabric.NOTE:Logging events at the Info severity level can deplete I/O moduleresources because of the high volume of events.NoneMonitors none of the severity levels.port [port_list]Specifies one or more ports to monitor for events. Choose one of the followingvalues:[port_list]Specifies the port or ports to monitor. [port_list] can be a set of port numbersand ranges delimited by spaces. For example, [0 2 10-15] specifies ports 0,2, 10, 11, 12, 13, 14, and 15.AllSpecifies all ports.NoneDisables monitoring on all ports.restoreRestores and saves the port, component, and level settings to the default values.saveSaves the log settings for the component, severity level, port, and display level.These settings remain in effect after an I/O module reset. The log settings can beviewed using the Show Log Settings command. To export log entries to a file, usethe Set Log Archive command.startStarts the logging of events based on the Port, Component, and Level keywordsassigned to the current configuration. The logging continues until you enter theSet Log Stop command.stopStops logging of events.59245-01 A 12-75