QLogic 8 Gb Intelligent Pass-thru Module for IBM BladeCenter ...

12 – Command ReferenceSet LogSPortMonitors all port events.SNMPMonitors all SNMP events.SwitchMonitors I/O module management events.display [filter]Specifies the log events to automatically display on the screen according to theevent severity levels given by [filter]. [filter] can be one of the following values:CriticalCritical severity level events. The critical level describes events that aregenerally disruptive to the administration or operation of the fabric, butrequire no action.WarnWarning severity level events. The warning level describes events that aregenerally not disruptive to the administration or operation of the fabric, butare more important than the informative level events.InfoInformative severity level events. The informative level describes routineevents associated with a normal fabric.NoneSpecifies no severity levels for display on the screen.level [filter]Specifies the severity level given by [filter] to use in monitoring and logging eventsfor the specified components or ports. [filter] can be one of the following values:CriticalMonitors critical events. The critical level describes events that are generallydisruptive to the administration or operation of the fabric, but require noaction. This is the default severity level.WarnMonitors warning and critical events. The warning level describes eventsthat are generally not disruptive to the administration or operation of thefabric, but are more important than the informative level events.12-74 59245-01 A